Mega block

Anonymous · Post by **Anonymous** » Sun Dec 21, 08 8:32 pm

Hey No Neck , spose the drinks are on me.

Yep , got the bottom end buttoned up on the 572/588/602/604/604.6.

Torqued the rod bolts up to 75ft/lb/.0065 stretch , think i got lucky , as all worked out spot on.

.

Ok , the way i worked the displacement.............

4.562 X 4.562 X 4.625 X .07852 X 8 = ?

it's a 604".

mopar_mark · Post by **mopar_mark** » Sun Dec 21, 08 8:52 pm

Brutus wrote:Hey No Neck , spose the drinks are on me.

Yep , got the bottom end buttoned up on the 572/588/602/604/604.6.

Torqued the rod bolts up to 75ft/lb/.0065 stretch , think i got lucky , as all worked out spot on. .

Ok , the way i worked the displacement.............

4.562 X 4.562 X 4.625 X .07852 X 8 = ?

it's a 604".

Glad you got everything sorted Adam, tis nice when it goes well

That 604.6

will soon be buzzin

latil · Post by **latil** » Sun Dec 21, 08 9:00 pm

I'm making it 621.88

Stroke X Pi =14.9473
Radius squared =5.20068
Multiply above = 77.36124164 X 8 = 621.888993312

Anonymous · Post by **Anonymous** » Sun Dec 21, 08 9:14 pm

latil wrote:I'm making it 621.88

Stroke X Pi =14.9473
Radius squared =5.20068
Multiply above = 77.36124164 X 8 = 621.888993312

Think you got yer Pi mixed up with yer mash Steve.

latil · Post by **latil** » Sun Dec 21, 08 9:18 pm

No,my rod length is too long

I used 4.750 instead of 4.625

Still get 605.635066378 using radius squared x Pi x length

AllKiller · Post by **AllKiller** » Sun Dec 21, 08 9:30 pm

Brutus wrote:Ok , the way i worked the displacement.............

4.562 X 4.562 X 4.625 X .07852 X 8 = ?

it's a 604".

604.63 spot on,
Knew it was bigger than 572 but was guessing at crank stroke

BAM.... Big Arse Mutha

Mick70RR · Post by **Mick70RR** » Sun Dec 21, 08 9:36 pm

Hope your gonna paint the block the right colour Adam.

Anonymous · Post by **Anonymous** » Sun Dec 21, 08 11:02 pm

What colour you thinkin Mick? , will be turquoise blue , me fav colour , already got a miss coat on it.

challenger · Post by **challenger** » Sun Dec 21, 08 11:22 pm

nice one mate that bottom ends lookin tough i reckon that will handle your right foot no probs

GTXJim · Post by **GTXJim** » Mon Dec 22, 08 12:31 am

Adam, are you going to de-burr the inside of the block around the lifter gallery's and give it a coat of paint, all helps and doesn't cost much

Anonymous · Post by **Anonymous** » Mon Dec 22, 08 1:01 am

Was thinking about cleaning the lifter gallery , was gonna do it when i clearanced for the rod bolts , but forgot

, would'nt take 5 min with the cutter , bit late now , unless i strip the rotating assbly down again.

, do you think Blue would of removed the excess iron?

AllKiller · Post by **AllKiller** » Mon Dec 22, 08 9:18 am

Brutus wrote: , do you think Blue would of removed the excess iron?

Hell yeah, and used "light" coloured paint

Love that turqoise blue colour

gotta put a coat of paint inside to help speed oil drain back

Mick70RR · Post by **Mick70RR** » Mon Dec 22, 08 10:34 am

This is a nice colour.