Any advice on paints for gauges. Need the white and the needle red/orange.
Dash bulb holders and resto paint
Moderator: Moderators
Dash bulb holders and resto paint
Hi, the black plastic twist in type holding the glass-blade bulbs in dash? Are these fairly standard to many makes?
Any advice on paints for gauges. Need the white and the needle red/orange.
Any advice on paints for gauges. Need the white and the needle red/orange.
Involuntarius peristalsis rectum
"A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo
<a href="http://www.mybannermaker.com/" target="_blank"><img src="http://img153.imageshack.us/img153/1862 ... cebsh4.jpg" alt='Create your own banner at mybannermaker.com!'></a><br>
"A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo
<a href="http://www.mybannermaker.com/" target="_blank"><img src="http://img153.imageshack.us/img153/1862 ... cebsh4.jpg" alt='Create your own banner at mybannermaker.com!'></a><br>
These should be the bulb holders:
http://cgi.ebay.com/ebaymotors/Mopar-NO ... 4ce71cfd09
I had brought some in the past from Richard Ehrenberg (Mopar Action writer), but he's not selling any at the moment:
http://myworld.ebay.com/ebaymotors/rehrenberg/
http://cgi.ebay.com/ebaymotors/Mopar-NO ... 4ce71cfd09
I had brought some in the past from Richard Ehrenberg (Mopar Action writer), but he's not selling any at the moment:
http://myworld.ebay.com/ebaymotors/rehrenberg/
- Attachments
-
- These are the Holders I had purchased
- Copy of bulbs.jpg (56.43 KiB) Viewed 684 times
-
- This is where they go in the back of the instrument panel.....
- panel-2.jpg (55.65 KiB) Viewed 684 times
68 Road Runner = Engine delivery system
Pure Mopar!
Keep Runnin...
Pure Mopar!
Keep Runnin...
-
Chris&Adam
thnks for links J-man. Will have a gander.
Hi Novaks', will check but fink I needs 4. Were always missing, so with dash out would be rude not to complete the set.
Did a surpisingly good job of fabbing a new circuit board. original was warped with tracking hanging off. Wasnt gonna pay $150 for new un. May be able to reproduce more if enough interest. Cant find correct replacement pins for the loom connector block tho, so have to clean and reuse originals.
Anybody any recommendations on the dial paint? US company does em, but not sure yet if paint would get kicked out during shipping.
Hi Novaks', will check but fink I needs 4. Were always missing, so with dash out would be rude not to complete the set.
Did a surpisingly good job of fabbing a new circuit board. original was warped with tracking hanging off. Wasnt gonna pay $150 for new un. May be able to reproduce more if enough interest. Cant find correct replacement pins for the loom connector block tho, so have to clean and reuse originals.
Anybody any recommendations on the dial paint? US company does em, but not sure yet if paint would get kicked out during shipping.
Involuntarius peristalsis rectum
"A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo
<a href="http://www.mybannermaker.com/" target="_blank"><img src="http://img153.imageshack.us/img153/1862 ... cebsh4.jpg" alt='Create your own banner at mybannermaker.com!'></a><br>
"A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo
<a href="http://www.mybannermaker.com/" target="_blank"><img src="http://img153.imageshack.us/img153/1862 ... cebsh4.jpg" alt='Create your own banner at mybannermaker.com!'></a><br>