Posted: Mon Sep 14, 09 10:45 am
Been here before Blue, i'd have to have aftermarket axles for 4.5" pcd, even that is problem because some of the axles/half shafts are too short for my aplication. They require green bearings and are shorter for use with a suregrip.
Tracked a bunch of info on ForAbodiesonly on this issue.
In total, it would still be cheaper to import two new wheels with correct size/bolt pattern.
I'm just at the stage where i've spent enough and the diff was meant to be the last big spend. I've rebuilt the motor again this year which wasn't on the list and have a new project arriving which will need looking after.
Anyhoo, thanks for the ideas
Tracked a bunch of info on ForAbodiesonly on this issue.
In total, it would still be cheaper to import two new wheels with correct size/bolt pattern.
I'm just at the stage where i've spent enough and the diff was meant to be the last big spend. I've rebuilt the motor again this year which wasn't on the list and have a new project arriving which will need looking after.
Anyhoo, thanks for the ideas