Mopar Muscle Association UK

Is this for you us charger or your aussie charger.
If ti's for your us Charger I will give you the dimensions for the mounting bracket I had made.

I modified the pads only to get all the pad touching the disc but it's not nessesary
anton

Hi Anton yeah for the usa charger like yours. That would be a real help

Craig
What Diameter Discs do you have.
The ones I used were 11 inch discs.

Here is a 1-1 scale drawing of the bracket and a 1-2 scale drawing of the disc spindle and caliper and hoe they relate to each other

Thanks, that should be a great help. I was planning on using my spindles as the discs fit theml looks like the spindles you used are differnent.

can you take a picture of you spindle and disc and post it on here for me to look at and I may have some ideas.
Anton

will sort one out, i wanna use my standard drum spindle and i have some mopar discs that fit them, not sure what there off tho

Here is the link I wanted to show you of how to use your stock drum spindles.




http://cgi.ebay.com/ebaymotors/Dodge-19 ... ccessories

Bad memories.


Ordered there kit last year, took months for them to send it, orded dics and calipers that they said fitted there brackets. so when it all eventauly came, the brackets were wrong for the discs and calipers.


what they faieled to tell me is they had changed there deisign of the brckets and now used differnt dics and calipers. haddnt changed the info on there web site.

wouldnt do anything about it, just apologised.




So have the discs still that fit my callipers, was gonna use the caliper i have, and make a bracket, but there only single pot calipers and i Bananarama! the seal on one. so the hilux ones seem better