Page 2 of 2
Posted: Wed Mar 07, 12 1:14 pm
by sinny
Cannonball wrote:right for a start the strips what ever you use are going to be circa 2-3" in toward the middle than what you are showing you dont need to bolt down or sideways through the hood just direct bond/glass whichever material you go with i would then use the nice mopar hood pin kit for the front,
believe me wood bonded on wiill be perfect and light,
Right got it, thanks Dunc. & thanks to everyone for your input I'll let you know how I get on.
Posted: Wed Mar 07, 12 1:16 pm
by Jon Connolly
Sinny
If you want some Daytona hood springs I have a set in Swaffham ... you can have them if you want them
Posted: Wed Mar 07, 12 1:52 pm
by sinny
Jon Connolly wrote:Sinny
If you want some Daytona hood springs I have a set in Swaffham ... you can have them if you want them
That's brilliant, thanks Jon. Can you PM me the address & I'll sort out picking them up.
Posted: Wed Mar 07, 12 7:17 pm
by Jon Connolly
If I`ve got the tailgate gas struts you can have them too and have a play