Posted: Sun Dec 29, 13 9:39 pm
looks fantastic, nice car 
More Darts, nice!
so we take over the world!!!....well drag strip anyway
Mopar Muscle Association UK
The premier Mopar club in Europe!
https://moparuk.com/forums/
Johnnys Doge Dart Swinger Pictures
Page 2 of 2
Posted: Sun Dec 29, 13 10:06 pm
Posted: Mon Dec 30, 13 8:27 pm
Good stuff....Cheecky buggers swapping it out prior to sale!!!!Johnny Dart wrote:When I was looking to buy a Dart, I knew It had to be a 1973 one to get the spec I wanted.More modern parts similar body(apart from the front)Dave81 wrote:Well someone has saved you a lot of hassle, money and hunting for conversion parts!!Johnny Dart wrote: Hi Dave, I bought the wheels in the US and imported them, they arrived before the car did.
Yes they are 4.5 x 5. Big bolt pattern,big ball joints, vented discs.they sent me the wrong wheel nuts and lock nuts,7/16 instead of 1/2. but they sent the correct ones no problems They were keen to sell to more of us over in the UK
company is called All American Tire & Wheel
I had been looking for a while, this one ticked most of my want boxes.
It was supposed to have a sure grip,that was another tick box, but when It arrived it has an open diff ! But I don't think you would find such a rust and accident free one,in a hurry,I am amazed at how it is under the arches arches and floor,no mud just dust,like new. Problem is do I use it in the Rain ?
Be prepared, as a SG unit with decent gears will be circa £500 for a good working one. £650+ for a rebuilt one!!
Whats the goal with it JD? Strip or street....or a bit of both??
Whichever.....I like!!
Posted: Tue Dec 31, 13 10:09 am
Giving the guy that sold it to me the benefit of the doubt, he only had it a couple of months, I think he just bought it to sell on, he maybe was told it had a sure grip, and passed the info to me !Dave81 wrote:Good stuff....Cheecky buggers swapping it out prior to sale!!!!Johnny Dart wrote:When I was looking to buy a Dart, I knew It had to be a 1973 one to get the spec I wanted.More modern parts similar body(apart from the front)Dave81 wrote: Well someone has saved you a lot of hassle, money and hunting for conversion parts!!
I had been looking for a while, this one ticked most of my want boxes.
It was supposed to have a sure grip,that was another tick box, but when It arrived it has an open diff ! But I don't think you would find such a rust and accident free one,in a hurry,I am amazed at how it is under the arches arches and floor,no mud just dust,like new. Problem is do I use it in the Rain ?
Be prepared, as a SG unit with decent gears will be circa £500 for a good working one. £650+ for a rebuilt one!!
Whats the goal with it JD? Strip or street....or a bit of both??
Whichever.....I like!!
I am looking for some heads, a intake and a 4 barrel 600 or 650. I have imported a comp cams XE 268H cam kit, and I have already got a 2500 stall converter.
I want to build a quick 318 to start with,just for street,with potential for strip, 300+bhp
Posted: Tue Dec 31, 13 10:10 am
Giving the guy that sold it to me the benefit of the doubt, he only had it a couple of months, I think he just bought it to sell on, he maybe was told it had a sure grip, and passed the info to me !Dave81 wrote:Good stuff....Cheecky buggers swapping it out prior to sale!!!!Johnny Dart wrote:When I was looking to buy a Dart, I knew It had to be a 1973 one to get the spec I wanted.More modern parts similar body(apart from the front)Dave81 wrote: Well someone has saved you a lot of hassle, money and hunting for conversion parts!!
I had been looking for a while, this one ticked most of my want boxes.
It was supposed to have a sure grip,that was another tick box, but when It arrived it has an open diff ! But I don't think you would find such a rust and accident free one,in a hurry,I am amazed at how it is under the arches arches and floor,no mud just dust,like new. Problem is do I use it in the Rain ?
Be prepared, as a SG unit with decent gears will be circa £500 for a good working one. £650+ for a rebuilt one!!
Whats the goal with it JD? Strip or street....or a bit of both??
Whichever.....I like!!
I am looking for some heads, a intake and a 4 barrel 600 or 650. I have imported a comp cams XE 268H cam kit, and I have already got a 2500 stall converter.
I want to build a quick 318 to start with,just for street,with potential for strip, 300+bhp.
But I need to get it MOTed and on the road first !!!!
Posted: Tue Dec 31, 13 12:59 pm
I am looking for some heads, a intake and a 4 barrel 600 or 650. I have imported a comp cams XE 268H cam kit, and I have already got a 2500 stall converter.
I want to build a quick 318 to start with,just for street,with potential for strip, 300+bhp.
But I need to get it MOTed and on the road first !!!![/quote]
To make 300hp from a '73 8.5:1CR 318 which is 150hp.......you'll need to up the CR to at least 9.5:1...preferably 10:1, a pair of eddy ally rpm closed chamber heads, which will then work well with the CR and have a lot of future potential for hp and be a good investment. You can do it with open chamber iron heads but you'll have less CR.
With that done....your cam, an Air-gap intake, headers, holley, you should get there. You'll have to work out which way you wanna do it, but you won't do it without the CR...unless you go forced induction.
And them wheels look good!
Les
I want to build a quick 318 to start with,just for street,with potential for strip, 300+bhp.
But I need to get it MOTed and on the road first !!!![/quote]
To make 300hp from a '73 8.5:1CR 318 which is 150hp.......you'll need to up the CR to at least 9.5:1...preferably 10:1, a pair of eddy ally rpm closed chamber heads, which will then work well with the CR and have a lot of future potential for hp and be a good investment. You can do it with open chamber iron heads but you'll have less CR.
With that done....your cam, an Air-gap intake, headers, holley, you should get there. You'll have to work out which way you wanna do it, but you won't do it without the CR...unless you go forced induction.
And them wheels look good!
Les
Posted: Tue Dec 31, 13 1:52 pm
Les Szabo wrote:I am looking for some heads, a intake and a 4 barrel 600 or 650. I have imported a comp cams XE 268H cam kit, and I have already got a 2500 stall converter.
I want to build a quick 318 to start with,just for street,with potential for strip, 300+bhp.
But I need to get it MOTed and on the road first !!!!
To make 300hp from a '73 8.5:1CR 318 which is 150hp.......you'll need to up the CR to at least 9.5:1...preferably 10:1, a pair of eddy ally rpm closed chamber heads, which will then work well with the CR and have a lot of future potential for hp and be a good investment. You can do it with open chamber iron heads but you'll have less CR.
With that done....your cam, an Air-gap intake, headers, holley, you should get there. You'll have to work out which way you wanna do it, but you won't do it without the CR...unless you go forced induction.
And them wheels look good!
Les[/quote] Hi Les, thanks for the input.I'm still doing the MOT registering work at the moment.
I don't know about you, but I tend to collect parts along the way, as I find when you really need them they are top dollar, but if you buy as the parts as they come up , they are more reasonably priced.
I have a long list of parts needed !!!!!!!!!!
I've had the 2500 stall converter for about 8 years, now I have the car to put in on.