Page 2 of 2
Posted: Wed Jun 28, 17 10:05 pm
by DaveB
its the oil that kills 90% of cam/lifters,evan engines with 50,000miles on them,put in the wrong oil,the cam/lifters will fail,seen it loads
Posted: Thu Jun 29, 17 6:10 am
by Pete
Totally agree, Dave!

Posted: Thu Jun 29, 17 12:12 pm
by Dave999
so is that using oil that was designed for modern motors with roller lifters in an engine that should have had a sae 30 mineral oil and a 1970s additive package.
Chrysler cross fire oil in a road runner as it were
or using the oil designed for the job and not using an additive?
cos if the oil is specifically designed to do the job....it should do the job..
Dave