Posted: Sat Mar 08, 08 8:41 pm
I see your a Daily Star Reader Craig, 
Keep up the good work. 
Keep up the good work. Mopar Muscle Association UK
The premier Mopar club in Europe!
https://moparuk.com/forums/
Craig's 69 CHARGER UPDATE
Page 13 of 17
Posted: Wed Mar 12, 08 6:21 pm
Altered the radio hole so my raidio now fits, dash is all just losely fitted at the mo, but you get the idea.
Posted: Wed Mar 12, 08 6:24 pm
like it craig minted up that will be cool
Posted: Wed Mar 12, 08 6:42 pm
Craig what speedo is that, and how is it conected to the box is it cable???
Posted: Wed Mar 12, 08 6:49 pm
Speedo is AUTO METER, other gauges are STUART WARNER.
I have a lockar speedo cable which im told will fit the box and auto m speedo.
havent fitted it yet.
Head liner going in.
I have a lockar speedo cable which im told will fit the box and auto m speedo.
havent fitted it yet.
Head liner going in.
Posted: Wed Mar 12, 08 6:56 pm
Rather you than me fitting that headliner its a git of a job by yourself, but looking at your other work on the Charger you will have no problem. I dont think I will bother with the Dart and leave it bare.
If you can find the part number of the gauge and cable I will go that route as the dash is getting replaced with something a little lighter and the std clocks are not being used.
If you can find the part number of the gauge and cable I will go that route as the dash is getting replaced with something a little lighter and the std clocks are not being used.
Posted: Wed Mar 12, 08 8:22 pm
craig. on your headliner have you cut the material back where the rods go through ??? you have to do that before you start the install
Posted: Wed Mar 12, 08 8:25 pm
I did think it would need cutting.
how do i know how much to cut?
there is some pen markings on some bits shuold i cut there?
Posted: Wed Mar 12, 08 8:29 pm
buzz me now 07974 088375
Posted: Wed Mar 12, 08 8:35 pm
there is some markings on it, it all makes scense now, it just never clicked before.
will give you a buzz when i have a look tomorrow, no good now as i will forget what you said.
cheers.
have you got any of the metal trims that clamp the headliner along the side above the side windows, as i only have the one side.
will give you a buzz when i have a look tomorrow, no good now as i will forget what you said.
cheers.
have you got any of the metal trims that clamp the headliner along the side above the side windows, as i only have the one side.
Posted: Thu Mar 13, 08 8:02 am
Blimey, Kirsten Imrie!! Thats been on yer wall for a long time.bruvmopar wrote:I see your a Daily Star Reader Craig,
Chargers looking good Craig, keep on it
Posted: Thu Mar 13, 08 6:14 pm
Had another go today, seem a lot beter now i trimmed whrere the bows go through.
need to get some more parts now.
need to get some more parts now.
Posted: Fri Mar 21, 08 8:32 pm
fitted electric fan, thermostat switch and washer bottle.
got someone coming soon to make me a custom loom.
got someone coming soon to make me a custom loom.
Posted: Fri Mar 21, 08 9:24 pm
Graig.
Has your Charger got a 22" rad support or 26"? And is that Electric fan from another car adapted?
Sorry if I sound dumb, but I may need to look into something like that myself in the not too distant future.
Has your Charger got a 22" rad support or 26"? And is that Electric fan from another car adapted?
Sorry if I sound dumb, but I may need to look into something like that myself in the not too distant future.
Posted: Fri Mar 21, 08 9:35 pm
Hi john
Rad 26 inch.
Fans just a universal 16 inch fan that you can get from most of the clasic car shops and car electric shops.
i got a place local to mewww.s-v-c.co.uk
that i got a wireing kit and a thermo kit from, should be able to set it so engine runs at whatever you set it at.
Rad 26 inch.
Fans just a universal 16 inch fan that you can get from most of the clasic car shops and car electric shops.
i got a place local to mewww.s-v-c.co.uk
that i got a wireing kit and a thermo kit from, should be able to set it so engine runs at whatever you set it at.