Page 16 of 42
Posted: Thu Mar 27, 08 7:29 pm
by Kev
Posted: Thu Mar 27, 08 9:01 pm
by Anonymous
hope this helps kev lol
Eagle 4340 steel ESP CRANK! 4.00 stroker part # 434040006123. (INTERNAL BALANCE)
Eagle 6.123 " H-beam ESP 4340 steel Bushed rods with 7/16 ARP cap bolts, part# CRS6123C3D
ROSS part # 99786 4.070" -21cc DISH (FORGED) PISTONS .030, pistons 10.6:1 comp w/62cc head10.2:1 comp w/62cc head, or 9.6:1 with a 68 cc head (((OR))) ......
ROSS part # 99788 4.070" 4cc DOME (FORGED) PISTONS .030, pistons 13.6:1 comp w/62cc head, or 12.5:1 with a 68 cc head
NOTE: ROSS doesn't make a flat top piston, If you want flat top pistons, I can mill the 99788 to a flat top, these would be 11:1 with a 68cc head. The price is $50 more.
NOTE: These pistons will work with Mopar OPEN and CLOSED chamber, Edelbrock and Indy heads!
Clevite H race rod & main bearings.
Plasma moly file fit or standard fit rings. Rings will be Speed Pro or Total Seal (not gapless)
Posted: Thu Mar 27, 08 9:10 pm
by Anonymous
What's the comp ratio Simon?
Are they open or closed chamber heads?
Posted: Thu Mar 27, 08 9:33 pm
by Anonymous
correct me if im wrong si. i think he's gone 11:1 with open 340 heads
Posted: Thu Mar 27, 08 9:38 pm
by Kev
This kit is good for 750+hp! Can be upgraded with ARP L19's rod bolts to 1000hp!
This is an INTERNAL Balance assembly to have this balanced would be an additonal $120.
http://cgi.ebay.com/ebaymotors/SB-MOPAR ... 0036756071
Posted: Thu Mar 27, 08 9:38 pm
by Anonymous
Posted: Thu Mar 27, 08 9:39 pm
by Anonymous
yep BUT i didnt do it on ebay i went to there website and phoned them several times nice bunch of guys
Posted: Thu Mar 27, 08 9:42 pm
by Anonymous
Brutus wrote:
whats up brutus
Posted: Thu Mar 27, 08 9:43 pm
by Anonymous
Nothing Simon , i hit the wrong smilie.
Posted: Thu Mar 27, 08 9:46 pm
by Anonymous
Brutus wrote:Nothing Simon , i hit the wrong smilie.
i cant wait untill things start going in
Posted: Thu Mar 27, 08 10:22 pm
by latil
[quote="strokerblue72"
i cant wait untill things start going in[/quote]
Is that what the girlfriend said?
Posted: Thu Mar 27, 08 10:23 pm
by TYREMAN
So what is an estimate of the Horsepower and Tourqe? (when built and in)
Posted: Thu Mar 27, 08 10:27 pm
by Anonymous
TYREMAN wrote:So what is an estimate of the Horsepower and Tourqe? (when built and in)
1800bhp
i dont know mate cant wait to find out though
Posted: Thu Mar 27, 08 10:28 pm
by Anonymous
latil wrote:[quote="strokerblue72"
i cant wait untill things start going in
Is that what the girlfriend said?[/quote]
think thats almost watershed territory
Posted: Thu Mar 27, 08 10:29 pm
by RayC
latil wrote:[quote="strokerblue72"
i cant wait untill things start going in
Is that what the girlfriend said?[/quote]
doubt it, or at least not since she took the wrapper off it
