Posted: Mon Nov 12, 07 4:10 pm
To some on here they don't count 
I presume the 383/440 K would be the same then.
I presume the 383/440 K would be the same then.Mopar Muscle Association UK
The premier Mopar club in Europe!
https://moparuk.com/forums/
Replacing the K Member for a BB
Page 4 of 8
Posted: Mon Nov 12, 07 4:12 pm
Posted: Mon Nov 12, 07 4:12 pm
Don't ask me. I know nowt. 
Posted: Mon Nov 12, 07 4:15 pm
Posted: Mon Nov 12, 07 5:08 pm
Dave, do you have James Schilds Original Challenger and Barracuda 1970/74? Page 52 left column.
Posted: Mon Nov 12, 07 5:10 pm
Having done the swop I think the guy is talking spanners.
The B & R/B motor will fit the same "K" as the 318/340 motor in an "E" body (and therefore most probably a '68 - '70 "B" body.
HOWEVER, the metal brackets that bolt to the block ARE different on both sides. I also think the "rubbers" are a different configuration, but cannot remember......
The B & R/B motor will fit the same "K" as the 318/340 motor in an "E" body (and therefore most probably a '68 - '70 "B" body.
HOWEVER, the metal brackets that bolt to the block ARE different on both sides. I also think the "rubbers" are a different configuration, but cannot remember......
Posted: Mon Nov 12, 07 5:27 pm
Nope. I heard it was so full of errors it was not worth having.latil wrote:Dave, do you have James Schilds Original Challenger and Barracuda 1970/74? Page 52 left column.
Posted: Mon Nov 12, 07 5:29 pm
I have twice been involved in fitting 383 engines into 318 Challengers and both were a direct swap with the correct engine mounts.Pete wrote:Having done the swop I think the guy is talking spanners.
The B & R/B motor will fit the same "K" as the 318/340 motor in an "E" body (and therefore most probably a '68 - '70 "B" body.
HOWEVER, the metal brackets that bolt to the block ARE different on both sides. I also think the "rubbers" are a different configuration, but cannot remember......
Posted: Mon Nov 12, 07 5:31 pm
Dave wrote:
I have twice been involved in fitting 383 engines into 318 Challengers and both were a direct swap with the correct engine mounts.
Good enough for me...SOLD!!
Posted: Mon Nov 12, 07 5:33 pm
Thank gawd for that.
Posted: Mon Nov 12, 07 5:36 pm
Tell me about it...I only asked and ended up in the middle of a full scale spanish inquisition!!latil wrote:Thank gawd for that.
Posted: Mon Nov 12, 07 6:42 pm
Nobody expects the.................
Posted: Mon Nov 12, 07 9:00 pm
Didn't realise there were photos on the Schumaker website. 
Posted: Mon Nov 12, 07 9:23 pm
I thank you..........
Posted: Mon Nov 12, 07 9:39 pm
See! I told you I was right. They are bloody identical. 