Unbelievable

R.RUNNER · Post by **R.RUNNER** » Sun Feb 01, 09 9:23 am

See!!!!!!!!!!!!! If they hadn`t stopped the "MOG" thread it could have carried on in there.

Trigger_Andy · Post by **Trigger_Andy** » Sun Feb 01, 09 9:42 am

Ah but then we're back to dealing with the wingers who sneak around PMing all the time with no back bone to air there views.

MilesnMiles · Post by **MilesnMiles** » Sun Feb 01, 09 9:56 am

Yeah, and as for those whingers...!

Andy, put the old avatar back on. Made me smile every time

Trigger_Andy · Post by **Trigger_Andy** » Sun Feb 01, 09 10:24 am

I'll dig it out, just for you! I found my new one mesmerizing!

I have a few Jessie Jane movies on my Hard Drive too, she's the biz!

Still, if you head over to the Watershed you can se a few pics I put up of Keeley Hazel! She's soooooo hot. got a Home 'Movie' with her in it too!

TYREMAN · Post by **TYREMAN** » Sun Feb 01, 09 10:32 am

Stu wrote:I believe it was my comments that kicked all this off, though I never expected or intended to get the thread locked or removed.

So I think it's me to blame. My apologies to anyone who lost input on that thread, it was not my intention. I should probably learn not to speak my mind.

Sorry.

I'm surprised it was you Stu,you should speak your mind mate

many of us here do that's why its such a good club,i wish i could take back some of the things i have said over the years but at least i have been honest at the time about how i have felt about something.

The Mods as always do a fantastic Job,and thank you

db · Post by db » Sun Feb 01, 09 1:30 pm

Trigger_Andy wrote:Ah but then we're back to dealing with the wingers who sneak around PMing all the time with no back bone to air there views.

Not something i've experienced but i agree with that.
If you don't have the balls to say it in public, don't say it.
If i got a PM i was bothered by, i'd post it up on the thread for all to see

R.RUNNER · Post by **R.RUNNER** » Sun Feb 01, 09 1:58 pm

MilesnMiles wrote:Andy, put the old avatar back on. Made me smile every time

OK mate.

Trigger_Andy · Post by **Trigger_Andy** » Sun Feb 01, 09 2:15 pm

R.RUNNER wrote:
MilesnMiles wrote:Andy, put the old avatar back on. Made me smile every time

OK mate.

He ment the good looking one!

R.RUNNER · Post by **R.RUNNER** » Sun Feb 01, 09 2:20 pm

Trigger_Andy wrote:
R.RUNNER wrote:
MilesnMiles wrote:Andy, put the old avatar back on. Made me smile every time

OK mate.

He ment the good looking one!

Yea, I know..................................that`s why I changed it.

Pity I can`t use this one though.

Trigger_Andy · Post by **Trigger_Andy** » Sun Feb 01, 09 2:28 pm

I'd use the Harley Lass if I where you Andy. Your Avater looks like a Drag Queen!

Ivor · Post by **Ivor** » Mon Feb 02, 09 3:00 pm

Blimey. I was working on the old house over the weekend and missed all the fun!

I bet that's the last time Jon asks me for modding advice!

Anyway Adam, the moral of the story is, if you build an engine to rev to eight grand, don't get your supposed "race car trained" mate to finish off putting your motor together.

In short the motor was running fine, I was on the M40 "running it in" when I noticed I had the entire road to myself, not a car in sight, gave it a little squirt through the gears when the timing chain let go.

The result was Bananarama! pistons at about 7,500 rpm and everything going a bit quiet. One of the valves actually parted company with the valve stem and punched its way right through the piston...I have that somewhere in the shed as a momento of how expensive this hobby of ours can be...

Stu · Post by **Stu** » Mon Feb 02, 09 3:04 pm

Pics please, Sir!

Dave-R · Post by **Dave-R** » Mon Feb 02, 09 3:47 pm

So how did the timing chain fail?

Ivor · Post by **Ivor** » Mon Feb 02, 09 4:09 pm

Well, it was difficult to tell Dave and I was so mad I didn't want to dwell on a post mortem, but the chain was completely buggered, we think he used the old one, but it was chewed up and in bits, so not easy to tell...especially when you have thrown it across the workshop... it ripped the sprocket and snapped the front end of the cam clean off.

Anonymous · Post by **Anonymous** » Mon Feb 02, 09 4:38 pm

Maybe the piston hit a valve & ripped the chain/cam gear off.