Mopar Muscle Association UK

mabe try this http://cgi.ebay.com/ebaymotors/ws/eBayI ... eName=WDVW

Mmmm. I would rather buy one I can see for myself though. If it is already at 30 thou and it turns out there is something wrong with it...

Worth thinking about though. Thanks Guy.

As I thought. The place I took my crank have just phoned to say the place they send out to for this work does not do it any more. I had a feeling it would be the same place I was at yesterday.

BUT they have a guy in South Yorkshire that might be able to do it. However he only picks up once a week so it will be next week before I know if he can do it or not and another week before I get it back fixed or not. Sigh.

Thats where my mate took his AEC crank, sprayed no2 big end it bent the crank about 15 thou runs with a wobble now but only about 1200 rpm flat out. CAREFUL THERE

I'll agree with what you're saying about trying it and see what happens at no cost to you, i'll also agree with the chances of finding someone who would do that are slim. But what happens if it all goes ok you rebuild the motor and then BOOOM

One other thing i'll add as you didn't bite my head off after my last post
there is another word for a repaired crank "bodged" comes to mind and i don't include regrinding or modifications in the "repaired"

I'll have a small wager with you, if i lose lets call it a donation to your crank fund, i bet that a proper repair to build up that crank will be more money in the long run than balancing another

Dave, been following your posts on this but frustratingly haven't really had anything to add!!

If the South Yorks source doesn't come through, how about spreading the net a bit wider? There might be places in other parts of the country who could do this. I don't know of any but first place I would ask is Bassett Down who do a lot of balancing, esp V8 Yanks - he must have a lot of connections and might know someone. Just a thought, might be worth a call.

If time isn't of the essence we might be able to get your crank passed around the country by the 'MMA network', usually works well!!

At least if you get a price you can do the maths vs. buying another crank

Also....I'm sure you've seen this thread but just in case.....
http://board.moparts.org/ubbthreads/sho ... 93&fpart=1

Worth keeping an eye on. Oversized thrust bearings might work (but doubtful you could get 'em large enough), or maybe a spacer....

Yeah that thread caught my eye today.

The thing is though. That thrust surface should really be like a mirror. Anything less and it will scour the bearing down again in no time.

At least I have options. Trouble is i can't afford most of those options until next year.

Ah stuff it!

http://cgi.ebay.com/ebaymotors/ws/eBayI ... ename=WDVW

In for a penny in for a pound.

Any of you lot tell wor lass about this and we are both dead!

I have to give a BIG THANK YOU to WIL and to ANDY for helping me out with this.

It's Decisive Dave!

At this rate it will be a pro-charger next

Hope it all sorts out OK.

Nice piece ! congrats mate, you will like it more when you see it

That will do the trick Should work out as the cheaper option in the long run & no nightmares worrying about a repair job.

Plus it is a good bit stronger. Something to reassure me when I see the 6500rpm shift light glowing bright through the door glass as Linda does one of her burnouts at SPR.

dave heres another one to try, it's called northern rebore center, it's at the top of westgate road, i thought this place was long gone but rick swan told me last night it is still doing buisness, the directions are as follows, go up westgate road past the bike shops, and turn left at the lights, go straigt on untill you hit the mini roundabout then turn right.
after the rdbt look left there is a turning just past the shop that is on the corner, go down what looks like a back lane, keep looking on your left for a black door this is where they are, any probs finding it just give me a ring, see ya soon trev

Good deal for a new forged crank!

Hey - I've been to Ramona! Smalltown USA in the So Calif valley, that's where they have the Mopar Fall Finale......

6500 rpm,burnouts ? can't think what knackered the old crank