Mopar Muscle Association UK

Umm. Am I being daft or isnt that a smallblock with the dizzy at the back of engine ? Or am I reading it wrong... ?

yeah its a 360 small block gona weigh in it for scrap

autofetish
What happened to the front seats did they get scrapped
Cheers dave

DaveBishop wrote:autofetish
What happened to the front seats did they get scrapped
Cheers dave

Seats are there and in good nick.

front and rear axle are out today.

If anyone wants anything pm me as it will burnt soon
(engine and box and seat and mirrors sold )

The more i read on the net to more i think this is a dana 70 axle

You didn't resist in the end then fella



Good luck to ya

autofetish Can I have the seats mine have been sat in the sun to long and the foam has turned to dust.
Cheers Dave

Jules wrote:You didn't resist in the end then fella



Good luck to ya

I just had to try

turned out to be a night mare got there at 9pm. Got out the pressure washer out gave here a good clean. Front brakes where soild with rust and could not free then up. So had to take off the front cailpers to tow it back. Vw t4 with that behined you with no brakes down a hill was not fun. got home at 9am the next day

Dave seats are yours and they are perfect

So have had a measure up and its a dana 70 with the 11inch gear gutted.

but love every min of ripping the engine and axle out. Better than trying to work out where all these shiny nuts and bolts go.



so dana 70 trailer axle for my tractor ???

Will
You should get some of your money back with the engine the 360 that I had in my old camper was a high performance one with a 4 barrel thermoquad on it and a heavy duty 727
Cheers Dave

DaveBishop wrote:Will
You should get some of your money back with the engine the 360 that I had in my old camper was a high performance one with a 4 barrel thermoquad on it and a heavy duty 727
Cheers Dave

what makes a heavy duty 727 a heavy duty 727

Will
If its a heavy duty 727 they have more clutches and springs in the top and reverse drum and the planetary gear assembly have four gears instead of three. I know when I stripped my one down that's what it had.
Cheers Dave

Found these on a Uk website


440 hp 1972 block steel crank not heard run but turns over £650.00 2 available
440 hp blocks 70-73 prob need rebore £200.00 each
1x 400 block with main caps build a stroker £200.00
1x426 wedge block and studded mains £300.00
set 440 sixpak rods need resizeing £80.00
Various sets big block heads all casting nos from £50.00 each

big block 727 rebuilt with shift kit not yet used not one off my rebuilds £300.00

b body dana axle 354 gears £1000.00
b body dana axle 454 gears £1000.00
x truck dana has 410 gears included has had ends removed ready for narrowing £120.00


http://www.dwatts80.fsnet.co.uk/Home%20page.htm

Its all show and no go kev

Will keep looking

I think that ad may be a tad out of date, Kev....though I stand to be corrected...

Pete wrote:I think that ad may be a tad out of date, Kev....though I stand to be corrected...

Yeah, I know! You should see some of the stuff, cars and prices! Sweet!