Cooler Carbs

Jeff · Post by **Jeff** » Mon Oct 17, 05 2:49 pm

Daves posts DO help people on this board! He is one VERY helpful guy.

Cannonball · Post by **Cannonball** » Mon Oct 17, 05 6:04 pm

HEY DON
please dont let the banter stop you posting advise, i for one want my cars to run faster and would appreciate any tips i can get to make it happen

Anonymous · Post by **Anonymous** » Mon Oct 17, 05 6:22 pm

It won't I'll be around when I have time..

11.62 @ 115 All Iron - All Motor - 318 - 3080#'s of Mighty Mopar

Kev · Post by **Kev** » Mon Oct 17, 05 6:33 pm

13.42@101 318, all iron, all motor, 3080# Oz Mopar in Merry Olde Englande (13.06@105 w/100hp drugs) Driven to the track and back (110 miles each way)
Your recipe please 8)

Anonymous · Post by **Anonymous** » Mon Oct 17, 05 7:14 pm

Stock 273 rods
Cast Crank
273 iron heads-Slightly ported

Victor manifold-Slight mods
Racer Brown ST21-Cam Flat tappet solid
Schubeck lifters
Smith Bros. Push rods
Racer Brown 1.6/1.5 rocker arms
Race Demon Carb
FBO Ignition
FBO/Mopar distributor
Dynamic 4200 convertor
4.56 gear
Diamond pistons
Pro Bolts

Works Pretty Good....

Kev · Post by **Kev** » Mon Oct 17, 05 7:15 pm

Simple recipe, but is it streetable?

Anonymous · Post by **Anonymous** » Mon Oct 17, 05 7:22 pm

4200 stall convertor
4.56 Gears with Spool
11.8 compression

....Make it tough to drive on the street but I guess if you wanted to you could.

We've used it to make laps up and down the track to dry off the rain water, me and the old hound dog driving around in circles for about an hour....then it ran out of fuel.

My wife drives it around the track to warm it up on race days, so if she can drive it anyone can.

Kev · Post by **Kev** » Mon Oct 17, 05 7:27 pm

Either yer wifes a giantess 8) or you got them seats on rails!

Anonymous · Post by **Anonymous** » Mon Oct 17, 05 10:26 pm

15.2 @ 87... all iron 318, all rust Aussie Charger

Stock everything apart from Holley 600 and headers. I just want to run a 14.9 with the ultra gay gears (2.92 open on 205 wide rubber) before I throw it all away and build something faster.

Anonymous · Post by **Anonymous** » Wed Oct 19, 05 10:42 am

NICE CAR DON!

Mid 11's with a 318. BLIMEY

Its probably been asked before, but does anyone know what the quickest quarter is for a 318 powered "street" car?

Jeff · Post by **Jeff** » Wed Oct 19, 05 10:59 am

4200 stall convertor
4.56 Gears with Spool
11.8 compression
Racer Brown ST21-Cam Flat tappet solid

Not streetable then!