Posted: Mon Jul 14, 14 11:48 am
Hooray!
smashingDave999 wrote:MOT. Yay
. ��
Mopar Muscle Association UK
The premier Mopar club in Europe!
https://moparuk.com/forums/
some engine progress
Page 6 of 13
Posted: Mon Jul 14, 14 5:25 pm
Posted: Tue Jul 15, 14 9:44 am
right
today i am at my lowest in a long time
I'm on call for work this week
i wanted to drive the car to work today
so last night was valve spring night
see if you can guess what happend next
plugs off
rockers off
pushrods out
wind engine over
stick washing line down plug hole
do cy1 ex valve spring
do cy1 inlet valve spring
wind over
washing line
do cylinder 2 ex valve spring
mount up spring compressor for inlet valve
take phone call
15 minutes
come back
remove valve spring compressor
take phone call
put valve spring compressor on cylinder 3
mount it, load it up smack it with hammer compress
remove retainer and collets
take phone call
........................................................................................................................................10 minutes later
something is missing
spend 1/2 hour mounting rare earth magnet in end of thin dowel
spend 2 hours fishing about. no luck
go to bed fed up to the back teeth, no sleep.
forgot that the tooth fairy was supposed to visit daughter
start day badly as well
hurry hurry hurry and distractions makes dave a stupid boy
so cometic head gaskets
spray em with blue hylomar????
or just whack em back in if they have still got their coating
$^67
8^&*
^&&*
%$$%
$£$£
4£56
3^£%
%$%4 56$%66g
&$56K
Dave
Hopefully i'll feel better now i've told somobody becasue i ant getting any work done
today i am at my lowest in a long time
I'm on call for work this week
i wanted to drive the car to work today
so last night was valve spring night
see if you can guess what happend next
plugs off
rockers off
pushrods out
wind engine over
stick washing line down plug hole
do cy1 ex valve spring
do cy1 inlet valve spring
wind over
washing line
do cylinder 2 ex valve spring
mount up spring compressor for inlet valve
take phone call
15 minutes
come back
remove valve spring compressor
take phone call
put valve spring compressor on cylinder 3
mount it, load it up smack it with hammer compress
remove retainer and collets
take phone call
........................................................................................................................................10 minutes later
something is missing
spend 1/2 hour mounting rare earth magnet in end of thin dowel
spend 2 hours fishing about. no luck
go to bed fed up to the back teeth, no sleep.
forgot that the tooth fairy was supposed to visit daughter
start day badly as well
hurry hurry hurry and distractions makes dave a stupid boy
so cometic head gaskets
spray em with blue hylomar????
or just whack em back in if they have still got their coating
$^67
8^&*
^&&*
%$$%
$£$£
4£56
3^£%
%$%4 56$%66g
&$56K
Dave
Hopefully i'll feel better now i've told somobody becasue i ant getting any work done
Posted: Tue Jul 15, 14 10:05 am
Yes. Thin coat.Dave999 wrote: spray em with blue hylomar????
Posted: Thu Jul 17, 14 8:46 am
zorst off
inlet off
gasket good
rockers off
guide plates off
head off
gasket good
valve springs done
head face cleaned
block face cleaned
gasket surfaces perfect and all still coated
waiting for can of blue hylomar
back on the road by tomorrow hopefully
dave
inlet off
gasket good
rockers off
guide plates off
head off
gasket good
valve springs done
head face cleaned
block face cleaned
gasket surfaces perfect and all still coated
waiting for can of blue hylomar
back on the road by tomorrow hopefully
dave
Posted: Thu Jul 17, 14 9:22 am
Dave
Are you coming to the mopars ?
Are you coming to the mopars ?
Posted: Thu Jul 17, 14 11:03 am
You are wicked man Mick!
Posted: Thu Jul 17, 14 11:11 am
Fingers crossed!
Posted: Thu Jul 17, 14 11:40 am
yeahMick wrote:Dave
Are you coming to the mopars ?
own more than 1 car....
i owe you a few beers from last time....
Dave
Posted: Thu Jul 17, 14 3:45 pm
Really i dont remember that. You can come and imbibe with us in our Gazebo if you so wish.
Mick
Mick
Posted: Thu Jul 17, 14 3:49 pm
Is that rude?Mick wrote:Really i dont remember that. You can come and imbibe with us in our Gazebo if you so wish.
Mick
Posted: Thu Jul 17, 14 4:06 pm
Any reason for changing your avatar to a photo of Shaun Ryder Dave 
Posted: Thu Jul 17, 14 4:12 pm
you're twisting my mellon maaan!
needed a change
reflecting my bouyant mood at not having destroyed anything and still having a minty fresh head gasket more or less
Dave
needed a change
reflecting my bouyant mood at not having destroyed anything and still having a minty fresh head gasket more or less
Dave
Posted: Thu Jul 17, 14 4:57 pm
I think it's because he has started swearing a lot.Blue wrote:Any reason for changing your avatar to a photo of Shaun Ryder Dave
Posted: Thu Jul 17, 14 9:11 pm
Looks more like special cakes or mushrooms to me.............Dave wrote:I think it's because he has started swearing a lot.Blue wrote:Any reason for changing your avatar to a photo of Shaun Ryder Dave
