Page 1 of 1
challenger front suspension specs
Posted: Tue Dec 05, 06 8:48 pm
by Wolfman
I have done a quick search but couldn't find any old postings about this i hope Dave might know this one, I'm looking for tracking specs for my challenger ie: toe-in or toe-out and any other useful specs for my front end. I need to get mine set-up in the near future. any help would be very useful thankyou. Also does anyone know where I could get a workshop manual from; specfic for mine.
Posted: Tue Dec 05, 06 10:27 pm
by Dave-R
Whats the matter with asking this my me own board?
Off the top of my head.
Set the camber 3/4 to 1 degree negative with as much positive caster as you can get. At least 2 degrees if you can.
Toe should be 3/32 inch IN.
Posted: Tue Dec 05, 06 11:32 pm
by Anonymous
A few lines from the Book of 70 Dart and Challenger
Posted: Wed Dec 06, 06 8:49 am
by Dave-R
Don't ever, EVER use the factory settings! They are completely arse-about-face.