Mopar Muscle Association UK

What plugs are you EddyHeaded Dudes running? NGK, if you please.

Same as Julie's SEAT!!

I will check tomorrow, but they are long reach multi thingy's.

NGK/champion 6s , there long reach 10 m/m, can't remmember the Nos

Bump~! Off to Halfords tomorrow!

Sorry kev, forgot to look , you could phone A to Z, No 01923221776 , as Jim has the eddy book , will give you all the plug Nos.

BCP6ET

Ta!

any recommendations on gap?

What you using to fire em?

MSD up to 60 thou.

Mopar orange box up to 5 thou.

They are 4 prong so gapping would be a nightmare!

Using Champion RC12YC's gapped a 40 thou seem to work ok

Ended up with BCPR7ET (3 prong) for future Nitrous use. One step colder than the 6's. Went to 2 Halfords who had none and three. Went to the local motor shop; "what's it for mate?" "Aftermarket Edelbrock alloy heads on a 440ci V8 Chrylser in a '73 Plymouth Barracuda cloned up as a 'Cuda T/A". Other bloke, "what the?" Roots around on the shelf and scares 8 up! He goes back to the bloke he was serving; "sorry mate, was sidetracked there." "More like excited", I say! "Yer right there!" He sez! Having trouble tracking down my 15/40 Magnatec................

Roots around on the shelf and scares 8 up

If he had Rootes on the shelf, must of been an old chrysler guy

Dude! That is poor! It was an old video from the 80's. Kunta Kinti! Will he get his fooooooooot chopped off.....

just rechecked, got BCP7ES in mine. single prong