Page 1 of 2
904 overhaul manual
Posted: Thu May 24, 07 11:42 pm
by Anonymous
Hey, anyone have a loan of a good overhaul manual for a 904 box, or know where i can get one (found one in the states but wont ship here)
If i get it i can drop it back at thepod in july!
Cheers Mo.
Posted: Fri May 25, 07 10:44 am
by Dave-R
Or buy one from Amazon.com?
Posted: Fri May 25, 07 10:57 am
by Dave-R
Just checked for you. Can't find one at all on the 904.
Who wrote the book?
Posted: Fri May 25, 07 11:27 am
by Anonymous
not sure found it on a site "technical video" it is described as "chrysler 727/904 transmission book" but they wont ship it to me
Another place does one i might try but i need it asap, jc whitney auto parts but it could take weeks to come!
Posted: Fri May 25, 07 12:27 pm
by latil
Factory service manual gives a full strip down/rebuild and all settings and tolerances.Can you get one on disc anywhere?
Posted: Fri May 25, 07 3:36 pm
by Dave-R
Most factory manuals for our cars are available from several sources. easy to find on the web.
What year transmission is it?
Posted: Sun May 27, 07 2:16 pm
by steve h
Try real steel i think they do a manual for the 904.
Posted: Mon May 28, 07 8:54 am
by Anonymous
Dave wrote:Most factory manuals for our cars are available from several sources. easy to find on the web.
What year transmission is it?
Its a 69 trans in a plymouth satellite
Posted: Mon May 28, 07 8:57 am
by Anonymous
Dave wrote:Most factory manuals for our cars are available from several sources. easy to find on the web.
What year transmission is it?
Its a 69 trans in a plymouth satellite
Posted: Sun Jul 01, 07 9:29 pm
by Lance
Try gearheadcafe.com they may do a disc!!
Posted: Thu Jul 05, 07 9:04 pm
by Lance
Mo, did you manage to get a 904 manual??
Also read your question about the transmission slipping, i think by the sound of it i have the same problem, did the adjustments sort the problem??
Posted: Fri Jul 06, 07 8:53 am
by Dave999
This contains rebuild and diagnosis for
727
904
torquefilte C and D (basically borgwarner 35 and derivatives)
Chrysler/ford/leyland P76 3 speed and 4 speed single rail manual
http://cgi.ebay.co.uk/Australia-Chrys-7 ... dZViewItem
Buy it scan the bits you need and flog it to one of our recent valiant charger owners.
tis the factory manual published by chrysler so it should be all correct
aussie 904 and 727 were imported, not locally tweaked in any way.
the C and D versions are BW local to Oz but also the gearbox used in stags jags n rovers
Dave
Posted: Fri Jul 06, 07 9:05 am
by Anonymous
Just so happens i only got the box rebuilt last night, was up till 3.30 working on it
Had to wait for 2 months for the parts cause summit sent them by regular mail!!!!!!!! then when the parts came they were for a 727 trans
So i ordered the bits on sunday and they came yesterday, i found the front brake band down to the metal and when i stripped out the clutch's one set was completly shot.
I got a TCI rebuild kit and performance kit for it so im hoping it all works out ok
Its handy enough to do but i had it restripped 3 times to check the pump was in right (bit tight) the mods on the valve body are done in a few minutes as its a pretty simple valve body, should be going back in tonight and ready for sat. Need to get some miles up before the pod.
I didnt get a manual after but did get help from someone on this site, im sure if you put up apost for help you will get it, i dont want to post his details incase other people start getting on his case!
Posted: Fri Jul 06, 07 9:25 am
by Dave-R
Good one.
I like it when people are not scared to have a go.
Posted: Fri Jul 06, 07 1:33 pm
by Anonymous
Dave wrote:Good one.
I like it when people are not scared to have a go.
Cheers Dave