Page 1 of 1
Dana/ 83/4" Measurements
Posted: Fri Oct 05, 07 5:10 pm
by Kev
Does anyone know the difference in measurements from the centre line of the axle to the middle of the uj on the axle yoke for a Dana 60 and an 8 3/4" 742? Betcha "no"!!
Prove me wrong!!!
Posted: Fri Oct 05, 07 5:16 pm
by Kev
And 727s are 2" longer than 904s?
Posted: Fri Oct 05, 07 5:32 pm
by Blue
727 is 3.81" longer than a 904.
Centreline of axle shaft to centre of UJ is 1.12" longer on a Dana 60 compared to an 8 3/4".
Posted: Fri Oct 05, 07 7:36 pm
by Pete
Chop that Prop!!!
Posted: Fri Oct 05, 07 8:30 pm
by Anonymous
Something you ain't tellin us Kev?
Posted: Fri Oct 05, 07 9:06 pm
by Pete
Best go to a new prop with 1350 joints at the same time....
Posted: Thu Oct 11, 07 10:35 pm
by Kev
Do I look silly?????
(Don't bother with an answer!!)
Posted: Thu Oct 11, 07 11:05 pm
by Anonymous
Got an interest in this thread now.
who wants an 8 3/4 anyway.
Posted: Thu Oct 11, 07 11:09 pm
by Pete
"Dana!" - the new black................
No Yoke
Posted: Fri Oct 12, 07 8:36 pm
by Anonymous
Hi Kev,
Depends on what yokes you use?
Seen a few different 1350 variants.
I would go for Strange stuff, the cheaper Summit stuff is POO!
I would measure it in SITCHU, always goes wrong otherwise.
Baccy.