Page 1 of 2

Posted: Wed Oct 17, 07 12:15 pm
by Kev
LS80W-90 Limited Slip Gear Oil

Posted: Wed Oct 17, 07 12:16 pm
by Kev
DaveR will be along in a minute to recommend some tractor stuff.....

Posted: Wed Oct 17, 07 1:26 pm
by Anonymous
too add the Mopar additive it's on weight

not very useful I know but a 9.25 takes 8floz

Posted: Wed Oct 17, 07 2:05 pm
by Dave-R
Kev wrote:DaveR will be along in a minute to recommend some tractor stuff.....
Cheeky begger. :P

Posted: Wed Oct 17, 07 2:06 pm
by Dave-R
Here is some tractor stuff I use. :roll:

£10 for 5 litres is not bad though is it? ;)

Re: ls80w90 gear oil

Posted: Wed Oct 17, 07 2:08 pm
by Dave-R
martywrenn wrote:does this LS80W90 oil come pre mixed with the additive?
and can this oill be picked up from any motor factors?
marty
Yes.

And probably.

Posted: Wed Oct 17, 07 2:08 pm
by Anonymous
GM's additive came in a small bottle.

Pop in all the bottle then top up with gear oil.

Not sure that may help though.

But it was an instant cure to the Detroit Locker syndrome.

Posted: Wed Oct 17, 07 8:53 pm
by Jeff
Chrysler dealerships sell a mopar LSD additive from theparts counter. £5 a bottle. Daves oil is a LOT cheaper though.

Posted: Thu Oct 18, 07 2:09 pm
by Dave-R
90 weight is correct for chrysler axles.

Posted: Thu Oct 18, 07 2:14 pm
by Dave-R
If it is LSD (limited slip diff) oil then it already has the additive in it. No need to add more.

If it is normal gear oil you need the aditive.