C body rear spring bushes
Posted: Mon Feb 18, 08 1:38 pm
Does anyone know what size they are? They look,at the rear end,the same as b body. I can't find any for sale in the states,ideally I'd like polybushes.
Mopar Muscle Association UK
The premier Mopar club in Europe!
https://moparuk.com/forums/
C body rear spring bushes
Page 1 of 1
Posted: Mon Feb 18, 08 3:02 pm
Posted: Mon Feb 18, 08 5:19 pm
Thanks,I'll ring them. 
Posted: Mon Feb 18, 08 7:05 pm
Is this what your after Steve http://www.justsuspension.com/product/114
Posted: Mon Feb 18, 08 9:45 pm
That was useful Jerry as it says what the size at the rear is. But I would still buy from ESPO. 
The front eye bushing will depend on performance level and model. Usually 1.5 inch on performance cars and 2 inch on others but that is only a general rule and may differ from model to model. So the only way to be sure is to measure the front bush or eye diameter.
The front eye bushing will depend on performance level and model. Usually 1.5 inch on performance cars and 2 inch on others but that is only a general rule and may differ from model to model. So the only way to be sure is to measure the front bush or eye diameter.
Posted: Tue Feb 19, 08 7:36 pm
All ordered from ESPO. Nice to talk to real people who know their stuff.
Their prices work out best all round.
Their prices work out best all round.
Posted: Tue Feb 19, 08 7:55 pm
Yep. They are the best by a mile. Shame they don't sell as much suspension stuff as they used to because you always got the best prices and advice from them. In particular the canny lass you usually get through to. She really knows her stuff.
Posted: Tue Feb 19, 08 8:01 pm
Paula,very helpful,great service.
Posted: Fri Feb 29, 08 8:19 pm
Thanks to ESPO,I've got this lot to sort out. 
I bought both sizes of front eye bushes because it was raining and I couldn't be bothered to check. 
I bought both sizes of front eye bushes because it was raining and I couldn't be bothered to check. Posted: Fri Feb 29, 08 10:07 pm
Poly.
Posted: Fri Feb 29, 08 10:17 pm
Anything for a firm ride,it's a SeaBody.Dave wrote:Poly.
Posted: Fri Mar 07, 08 6:37 pm
A little tip for anyone without a press, (like me).
To remove the front spring eye bush,lay the spring on it's side and drill the rubber out of the bush.About 6 times through and the rubber will dig out with an old screwdriver. This leaves just the thin outer band in the eye which will nip out with a sharp chisel. Total time to remove both bushes completely - 15 mins. Cost - pennies.
I've used this method for years on all sorts.
To remove the front spring eye bush,lay the spring on it's side and drill the rubber out of the bush.About 6 times through and the rubber will dig out with an old screwdriver. This leaves just the thin outer band in the eye which will nip out with a sharp chisel. Total time to remove both bushes completely - 15 mins. Cost - pennies.
I've used this method for years on all sorts.