Door adjustments
Posted: Fri Dec 31, 04 7:39 pm
Anyone got any tips on adjusting doors - never tried this before. 
You done that before then, Steve Mopar Muscle Association UK
The premier Mopar club in Europe!
https://moparuk.com/forums/
Door adjustments
Page 1 of 1
Posted: Fri Dec 31, 04 10:49 pm
Wow! You done that before then, Steve
You done that before then, Steve Posted: Sun Jan 02, 05 6:08 pm
mmm, very comprehensive reply Steve, more than I could of wished for.
Just been in the garage this afternoon having a look, getting door panel off and sussing out the glass alignment. Passenger door is fairly well located, but the glass isn`t sealing tight against A-pillar rubber and is too far back against quarter light (by about 3mm I guess), so I was wondering can I adjust glass fore and aft or do I need to move the door. The glass seems a little loose in the channel - is that normal (or wear and tear with age)?
Drivers door definitely needs adjustment, so I`ll be using some of your tips for that
Just been in the garage this afternoon having a look, getting door panel off and sussing out the glass alignment. Passenger door is fairly well located, but the glass isn`t sealing tight against A-pillar rubber and is too far back against quarter light (by about 3mm I guess), so I was wondering can I adjust glass fore and aft or do I need to move the door. The glass seems a little loose in the channel - is that normal (or wear and tear with age)?
Drivers door definitely needs adjustment, so I`ll be using some of your tips for that
Posted: Sun Jan 02, 05 6:34 pm
It should be quite a snug fit, you might be missing the bit in the slider or something (which would explain why it's too far back as well).
Posted: Sun Jan 02, 05 6:47 pm
more investigation required methinks!!
Posted: Sun Jan 02, 05 8:34 pm
When you get it sussed you can give me a hand with mine Neil. 
Posted: Mon Jan 03, 05 1:01 pm
no problem Dave, just hope you aren`t in a hurry