Mopar Muscle Association UK

How do I refill my gearbox without getting the vast majority of the oil all over my shiny garage floor.
Used one of them cheapo syphon pumps,disaster ,talk about messy.

Yeah, come on guys, I need to know this one as well!!

Edit: 4spd also (of course!)

Make sure you have the sump on.

A funnel with a long thin filler neck.

Or is it manual?























Only messin.

There's a clue in his signature line.




























4 spd

Seriously though, when the trans is in the car you have to go upwards with the oil to get it into the fill hole, I was thinking a large coke bottle with a flexible pipe that I could squeeze to get the oil in!

Would be easier to make a hole in the trans tunnel and fill from the passenger footwell!

How does everyone else do it then??

Long bit of plastic pipe up round bellhousing into engine bay,push a funnel in it and pour in just under the right amount of oil. Then top up a little at a time. Unless you can find a syringe big enough,with a flexy pipe.

Well this actually sounds like a plan worth trying!

latil wrote:Long bit of plastic pipe up round bellhousing into engine bay,push a funnel in it and pour in just under the right amount of oil. Then top up a little at a time. Unless you can find a syringe big enough,with a flexy pipe.

latil wrote:Long bit of plastic pipe up round bellhousing into engine bay,push a funnel in it and pour in just under the right amount of oil. Then top up a little at a time. Unless you can find a syringe big enough,with a flexy pipe.

Cheers for that Latil,will give that a go.I knew there had to be an easier(less messy)way.

Steve

I live close to Ashbourne, maybe we should meet up some time when my car is back on the road.

Cheers

Julian

Yeah,gimme a shout when your up and runnin'