Mopar Muscle Association UK

Posted: **Wed Apr 16, 08 12:38 pm**

Anyone know where i can get a L/H thread stud for a 71/2" axle

Posted: **Wed Apr 16, 08 12:59 pm**

Try Geof Hauser. He has rebuilt loads of mopar axles and he tends to keep most bits for them.

Posted: **Wed Apr 16, 08 1:42 pm**

thanks for the prompt reply Dave, would you happen to have a contact address or a number for Geof please ?

Posted: **Wed Apr 16, 08 1:51 pm**

http://www.hauserracing.com/

Posted: **Thu Apr 17, 08 10:33 am**

Bradfield is a bit out of the way for me, but if you don't mind putting a few in the post I'm sure we can come to some financial agreement.

Posted: **Thu Apr 17, 08 12:42 pm**

Hi LANCE i have ten large knurl and five small what size are they

i think the small are front

Posted: **Thu Apr 17, 08 1:38 pm**

As Blue pointed out in the wanted section they are 7/16" studs, i should have been more specific, so if you do have a couple of spare 7/16" studs i would be grateful.

Cheers lance.

Posted: **Thu Apr 17, 08 1:40 pm**

Forgot to say thanks Kev, tried Hauser and they can order some for me if nobody can help.

Anyone know is the stud thread UNF ??

Posted: **Thu Apr 17, 08 1:54 pm**

Lance wrote:Anyone know is the stud thread UNF ??

Yes.

Posted: **Tue Apr 22, 08 4:52 pm**

Im looking for 1 rear rh thread stud for an 8 3/4 for my duster, dont think its got standard axles, the studs are quite long, about 3 1/2 inch long, think they are 5/8 inch thick, not sure of the thread but if some one has a stud and nut that will get me out of the stew! cant really gun it too much with a missing stud

Mopar Muscle Association UK

wheel studs

wheel studs