Mopar Muscle Association UK

While I am out in the S I thought I would price up a spare ignition module for my car, I have heard some of you say they are prone to failure.

Needless to say, at $22.99 (£12) = tax I bought one. I don't think they are too expensive in the UK, but I am sure they aren't that cheap.

Happy to get others, might need to wait until next time though, got a Moroso sump to bring back this time

Get an MSD 6A and gash the module

Not bad Kev, but Mancini had a bucket of 'em at the MATS for 10 bucks each. I bought one to toss in the trunk as a spare, but I should have bought the whole bucket...

Knightcharger wrote:Get an MSD 6A and gash the module

I'll have you know Bob my ECU provided me with years of trouble free motoring , can't remmember if the chrome one lasted any longer than the orange one , think i fitted 5 chrome one's to 10 orange one's.

The insulation plastic sealer stuff inside the module on the old New Yorker melted and run down the baulkhead like hot jam damned if I could get it off.
still worked fine though

Lol same here

My ignitor was faultless and just as good as my MSD, just not as controllable

Steve my wife is like an MSD 6



She likes to be in control

....she needs a limiter

No Steve more like a jump start

Id just buy a 4 pin HEI module from a 76-86 chevy buick or similar

same function but no stuff to leak out and they go wrong slighlty less.

work well with a Mopar electronic dissy
bypass your ballast resitor
and run a 12 voilt coil
$17 -36

Napa parts stores do Echlin brand for approx $36 or unbranded chinese for $17

i've run the $17 one since 2003 and have had no issues

Dave

I have an MSD i'm in control
starsk's

Knightcharger wrote:No Steve more like a jump start

bri, reckons the wrist start is the best bob,