Mopar Muscle Association UK

the dipstick tube on Brl is real old & a loose fit in the 727, have tried various combos of o rings & silicon but it still keeps leaking.
fill the box to max when running & hot, then when you switch it off & as it cools the level comes up & the oil leaks where the tube goes into the box, should the oil level be this high (am I overfilling it- im just going of the dipstick but dont know how accuarte that is )
anybody ?
duncan/blue ?

Are you sure the dipstick tube is fully in? Often the pan gasket needs to be trimmed because it can stop you getting the tube far enough in.

This will sort it.

http://store.summitracing.com/egnsearch ... 4294863736

I have got one of those - very good, apart from the fact that it still secures via the bell housing bolts, making gearbox removal a pain. Chopped the floor out not, so that should help

cheers lads, but i dont think tube was pushed in far enough & nick that hughes tube might be a good idea