Page 1 of 1
Posted: Thu Feb 03, 05 9:46 pm
by MrNorm
Steve, I don't think there are any permanent mods - there is a carrier rig which bolts on using the existing 4 holes, then the cap hinges on that, as you can see.
I don't have one - but probably will end up getting one.
Posted: Sat Feb 05, 05 6:10 pm
by Anonymous
Yeah, straight swap Bilko, done it with mine.
Dont forget the inner cap to seal the filler neck though, as the flip top wont seal. I converted my old cap for that purpose. Also dont forget, there is a stainless trim ring that bolts down with the flip tops hinged base.
So there are three items, inner seal cap (can get lockable ones), the flip top with hinged base, and the trim ring.
Posted: Sat Feb 05, 05 7:36 pm
by Anonymous
Heres all the items!
Posted: Sun Feb 06, 05 1:14 am
by Dave-R
There are vented and unvented versions of the inner cap. You can get the unvented ones new for about $8.
Posted: Sun Feb 06, 05 9:25 am
by Bryan
there is one for sale on ebay.uk now.
Posted: Sun Feb 06, 05 10:52 am
by Alex
There is a printable version on the MMA website
Posted: Sun Feb 06, 05 2:09 pm
by Dave-R
Hey Bilko. Point him to my message board too!
600 "active" members and still climbing!
600 "active" members and still climbing!