Page 1 of 1

will it fit

Posted: Sat Oct 18, 08 8:53 am
by LONGSHOT
Mornin you lot-quick question-Latil spotted on e bag a 72 dart with discs
and 8 1/4 axle -would that all fit my 69 dart?thanks,Dave

Posted: Sat Oct 18, 08 9:16 am
by Pete
I think so, but that is a non-binding response ;)

will it fit

Posted: Sat Oct 18, 08 10:23 am
by LONGSHOT
cheers Pete-anyone else clarify further?dont want to bid if it wont fit :help:

Posted: Sat Oct 18, 08 10:43 am
by MilesnMiles
Didn't the 8.25 replace the 8.75 rear on A bods? If so, should fit unles the 69 Dart has a wider track than the 70's versions.

Posted: Sat Oct 18, 08 12:03 pm
by Cannonball
MilesnMiles wrote:Didn't the 8.25 replace the 8.75 rear on A bods? If so, should fit unles the 69 Dart has a wider track than the 70's versions.
no way will a 69 have a wider track could be the other way round

Posted: Sat Oct 18, 08 5:42 pm
by MilesnMiles
8 & 3/4 in a bod is 56" tack. A bods used 8.25" axles from '73 up. Phone the guy and get him to measure it!

Posted: Sat Oct 18, 08 6:01 pm
by Blue
It will all bolt straight in, I've done it before. It will all be large stud pattern though, which will urinate on your chips somewhat, unless you were planning on getting another set of wheels....

Posted: Sat Oct 18, 08 6:23 pm
by MilesnMiles
well, if the end result is that you have a spare pair of 7 x 15 with 4"pcd. Gimme a shout!

Posted: Sat Oct 18, 08 8:47 pm
by mopar_mark
Pete wrote:I think so, but that is a non-binding response ;)
Non binding axle sounds a good idea

will it fit

Posted: Sun Oct 19, 08 12:33 pm
by LONGSHOT
ok,cheers chaps- Blue- i wanted to change the wheels anyway as they are only 13 inch rims!! looks like a bit of work this winter then :thumbright: