Page 1 of 1
Sway Bar Set Up for a B-Body
Posted: Mon Mar 16, 09 1:48 pm
by Scooby
Does anyone have any information re the set up installation of a sway bar.
Pref to 72 Charger. Pictures would be great. Front Please.
Thanks in advance.
Richard.
Posted: Mon Mar 16, 09 2:49 pm
by Dave-R
You feed it through the K-frame and bolt it on.
But of course if your car never came with one in the first place it is a bit more involved than that.
Is this the case? Did it come from the factory without one?
Posted: Mon Mar 16, 09 3:26 pm
by Scooby
Dave.
Yep didnt come with one,hence all the questions.
Thanks.
Rich.
Posted: Mon Mar 16, 09 3:33 pm
by Dave-R
The sway bar kits I have seen come with instructions.
Obviously you don't have those so...
You need the lower control arms from a car that did come with a sway bar. These have the bar mounts welded onto the front of them.
Or if you are good at welding you could fab a pair of mounts and weld them on.
You will also need a couple of 1/4 inch thick plates to bolt to the k-frame. the sway bar bushings mount to these.
Look at anyones Moapr to see how it should look when done.
Posted: Mon Mar 16, 09 4:11 pm
by Scooby
Dave.
Thanks.
Richard.
Posted: Tue Mar 17, 09 12:26 am
by Anonymous
It will 60ft better without a sway bar.
Posted: Tue Mar 17, 09 11:24 am
by Scooby
Brutus wrote:It will 60ft better without a sway bar.
Ad Mate you taking the p....s
Rich...