Page 1 of 1
Wheel PCDs
Posted: Wed Mar 02, 05 12:24 pm
by Anonymous
Does anyone know what the PCD of the Crysler Charger hub is? (72 model).
I want to know this so i can keep my eye open for a set of decent alloys.Also does the Chrysler/Dodge/Plymouth hub have the same PCD as say Ford or Chevy?
Cheers
Mark.
Posted: Wed Mar 02, 05 12:28 pm
by Anonymous
Most Mopars are 5x4.5" this includes Jeeps and AMCs.
Some/most/all A bodies are 5x4"
Some Imperials, station wagons and apprently some "special heavy duty" C bodies are 5 on 5" PCD.
Some vans, pickups are 5 x 5.5" and/or 6 x 5.5" PCD if I remember right.
Other marques which share our 4.5" PCD are US Fords, except some full size LTDs, 70s Lincolns and some Mercurys which are 5 on 5", some of the Japanese stuff like Lexus and I think some of the big Datsuns use 5 on 4.5 (although they call it 5 x 113.4 mm) and some Mazda pickups are also 5 x 4.5"
Posted: Wed Mar 02, 05 12:42 pm
by Derek
Posted: Wed Mar 02, 05 2:50 pm
by Anonymous
Damn!!! I could have bid on those 5 slots on ebay then!!!
Many thanks Derek and Alistair,now i know what to look out for sunday!!
Posted: Wed Mar 02, 05 3:13 pm
by Anonymous
(he means 114.3)
Posted: Wed Mar 02, 05 7:11 pm
by TrevD
what sort of wheels are you looking for , style / size ?
Posted: Wed Mar 02, 05 7:30 pm
by Dave999
Aussie valiant wheels are the same PDC as Aussie ford wheels of similar vintage not that that helps much
however have a mootch on here
http://www.moparmarket.com in the parts for sale section
theres a set of orginal w35 ROH RT charger wheels for ?400
Dave