Mopar Muscle Association UK

wanna put a bumble bee stripe on my 68 coronet rt, can only find white ones but car roof & trim are a funny pearl white & what to get stripe to match, my local sticker man will get the material but needs a diagram to make it & where exactly to place it, anybody ???
or anybody know where they sell odd coloured one - this i'll be a right queer colour to a match

Check out Dave Patek, Performance car graphics in Florida for some accurate graphics. That may give you a template or you may even find one close enough to meet your needs

Andy, have you thought about painting it?

a. You get the coulour / shade you want
b. no shrinkage in the sun
c. won't catch polish when you clean it or dirt when you use it.

cheers pete, will try him
clive, dont want to paint it on, as car is a stripe delete car & might change my mind @ a later date

Fair do's mate

I got my stripe from US ebay - it was about $50 I think. Size/shape/fit were excellent but there were only about 5 colour choices. Might be worth a try - cheaper option if you dont like it and want to rip it off.

Might be worth having a word with Hugh Potter. He's supplied Mopar decals in the past and is back on the board as MoparManUk.

If you want a factory correct one. You need the correct file to cut out. I looked into buying these a while back, but would of cost me thousands!

Options are..... get your man to do some rough ones and pay till you like it.

Get a rubbing from an exiting car, make up file in correct application, then cut.

Buy a factory correct one, take dimensions from that and do as above.

Buy the file to cut from a US supplier, give that to your man.

Cheapest option is to buy a white one, use that. OR buy a white one, and pearlise that.

Hope that helps Andy.

Jeff

cheers my canadian friend