Mopar Muscle Association UK

I need a little help here.. I have an MOT on Monday and don't have washers or wipers I cant get the switch bezel out of the dash to check for power, I've removed the 4 screws and used a small pick to get behind it and pull but no joy! The manual says to remove screws and pull out bezel..Am I missing something?

To remove the dash you will need to lower the steering column on the three bolts and remove the a-pillar plastic cover. To pull the dash out you will also have to disconnect the speedo drive cable as that stops you from pulling the dash forward.

On my charger if I take the drivers seat out I can lye in the car and I can see most of the back of the dash and that should help just to test for live.

To check if the washer is working apply a live directly to it before you pull the dash.
Is your car a 2 or 3 speed wiper car as sometime the third speed wire and the washer wire can be mixed up.

Agree with Anton. Check circuit through, but if you need to take the switch panel, its easier to unscrew the switches from behind - shouldnt need to though. Just trace wires through - double check big bulkhead connector too.

I agree with Anton too. He knows how to sort it. I know - I watched