Page 1 of 1
clutch etc
Posted: Thu Jul 14, 11 8:44 pm
by RoelB
I am trying to get a new clutch, pressure plate etc for the Roadrunner. Previously I used John Woolfe and Real Steel, but they have nothing in stock. Anybody have an idea where I can find these in the UK?
Thanks
Posted: Sat Jul 16, 11 4:35 pm
by Anonymous
Hi Roel,
What size and what splines?
Bacman.
Posted: Sat Jul 16, 11 5:03 pm
by RoelB
Bacman, it is a 18 spline, 11''.
Can you help??
Posted: Thu Jul 21, 11 5:19 pm
by Anonymous
Hi Roel,
Thought I had a spare 11incher, but its a later 10.5inch.
Will have a phone around for you.
bacca.
Posted: Thu Jul 21, 11 9:46 pm
by RoelB
Thanks Bacca, I also have a spare 10.5,
talk soon
Posted: Fri Jul 22, 11 11:10 am
by Dave999
is it rebuild able?
you can always get the driven plate refaced and rebalanced or completely rebuilt with new springs or indeed a new metal plate
which is what i'm doing today
£25 for new friction material on a 9.5 i'd guess bigger will cost more but still.....
http://www.autoandindustrial.co.uk/inde ... e=clutches
Dave
Posted: Sat Jul 23, 11 11:29 am
by RoelB
Thanks Dave, a friend of mine local that runs an American workshop is going to get it refaced, he said it is good enough for that
Posted: Sat Jul 23, 11 9:35 pm
by Dave999
mostly are unless the spline is knackerd according to the old fella i left mine with.
very much of the type " its a travesty that people just throw this stuff away etc etc"
he's going to pop out a spring and see if its in spec as well
too much play in the mounting for the spline and they'll kick it back.
any cracks
and they will
but they can make new supporting plates as well...
Dave