Page 1 of 9
Phill's 69 Charger
Posted: Sun Jul 03, 05 12:44 pm
by Anonymous
Hi all,
Here's a pic of my 69 Charger currently being restored at JPC

Posted: Sun Jul 03, 05 1:38 pm
by Holly
It's good enough to warrant seeing three times
Should be awesome when it's done!
Posted: Sun Jul 03, 05 1:44 pm
by Anonymous
Here it is again as of Saturday (2nd July) 8)
Posted: Sun Jul 03, 05 5:49 pm
by Anonymous
Bit a**e about face this

, but here's a pic taken on the 18th June of it all together for final alignment. 8)
Posted: Sun Jul 03, 05 8:00 pm
by Anonymous
If the prep work on that car is anything to go by then it should be the best General in the UK when finished.
I look forward to seeing it soon.
Any idea on a completion date?
Posted: Sun Jul 03, 05 8:15 pm
by Anonymous
That is some serious work there Phil, hope it all works well and cant wait to see it 8)
Posted: Sun Jul 03, 05 10:53 pm
by Anonymous
Thanks Guys

I'm hoping it'll be ready for the Mopar Euronats

Whaddayarekon?

John's quite rightly not going to Bananarama! so if it is then great. The body should be painted over this next week then its just a case of putting it back together. Speaking of which I've been abusing Mr Mastercard and been buying/restoring some bits..........................1st up my newly restored instrument cluster by Autoinstruments.com

Posted: Sun Jul 03, 05 11:02 pm
by Anonymous
Tich toch tach! You have been abusing the card! the dash reassembly is certainly alot of fun!
Posted: Mon Jul 04, 05 10:19 pm
by Anonymous
Here's my E Brake that I had restored at SMS Auto

. Again its beautifull 8) I also got them to restore my hood hinges and also supply me with an exchange heater unit. You've gotta see these

Posted: Mon Jul 04, 05 10:29 pm
by Anonymous
Here's the heater unit. My car was originaly a 318 with A/C, which had been disconnected long ago. John at JPC suggested that he could tidy up the bulkhead by removing all the unused A/C pipes. Trouble was that the A/C heater unit is a different shape to a non A/C with the fan motor poking through the bulkhead. John plated all the holes and now this unit can go straight in 8) 8)

Posted: Mon Jul 04, 05 10:54 pm
by charger01
When you finish with your mastercard Phil send it up here,my car is sulking after seeing them pics

Posted: Mon Jul 04, 05 10:59 pm
by Anonymous

My mastercard is sulking after the sevre bashing its had!!!!

And while it was on the ropes I hit it again.....no mercy. I'll be making my tv debut on the forth coming ocean finance adverts

Posted: Mon Jul 04, 05 11:29 pm
by Derek
Why didn't you do the instrument cluster yourself, I found It quite easy and it only cost about ?25 all in