Page 1 of 4
RWYB SantaPod this Saturday 13th
Posted: Mon Oct 08, 12 9:29 am
by Adrian Worman
Load of us meeting up this Saturday for a last blast before the daylight Bananarama! off
Weather forecast is sunny too!
Posted: Mon Oct 08, 12 9:39 am
by Pete
Working hard on the Barracuda to get there.
Still got to get the wheelie bars on and a few last minute jobs sorted out.......fingers crossed.............
Posted: Mon Oct 08, 12 10:29 am
by Adrian Worman
Nice one Pete
Posted: Mon Oct 08, 12 10:34 am
by Pete
It would be good to have other people to push the car and sweep up the bits
Posted: Mon Oct 08, 12 11:43 am
by John
All being well
Re: RWYB SantaPod this Saturday 13th
Posted: Mon Oct 08, 12 11:55 am
by Don
Adrian Worman wrote:Load of us meeting up this Saturday for a last blast before the daylight Bananarama! off
Weather forecast is sunny too!
Gonna try and make it Ade, got to get the trans back in and sort a few other jobs - so hopefully
Posted: Mon Oct 08, 12 1:33 pm
by Demon James
All good to go despite gearbox concerns
trying to convince my Dad to take his Austin 7 so I've got sombody to beat
Posted: Mon Oct 08, 12 1:42 pm
by Adrian Worman
Posted: Mon Oct 08, 12 7:56 pm
by AllKiller
Should be there ...trying to convince Paul to take the Dart, after the Nats farce
Posted: Mon Oct 08, 12 11:11 pm
by Pete
Not looking good at the moment.
Unable to get the pinion angle within tolerance. Worrying.
Having another go tomorrow and will re-laser the chassis to make sure nothing is out of whack............not prepared to run a wonky car.............
Posted: Tue Oct 09, 12 12:39 am
by Adrian Worman
Pete wrote:Not looking good at the moment.
Unable to get the pinion angle within tolerance. Worrying.
Having another go tomorrow and will re-laser the chassis to make sure nothing is out of whack............not prepared to run a wonky car.............
I don't blame you after you're experience
Keep at it.......
Posted: Tue Oct 09, 12 8:01 am
by Pete
Aye, we are having another crack at it tonight. We had to make packers for the transmount to shim up the pinion angle...
Also now the car at full weight has settled and we have front end ground clearance issues - mostly due to the monster sump....may have to make packers for the lower bump stops so we don't take out the sump either on rough ground or on landing. More fabriccation, more delays...............
Posted: Fri Oct 12, 12 10:58 am
by Pete
What do we think guys:
http://www.myweather2.com/Motor-Racing/ ... spx?sday=1
Car is pretty much ready, but is the weather???
Posted: Fri Oct 12, 12 11:39 am
by John
It will be fine Pete
Posted: Fri Oct 12, 12 9:32 pm
by Pete
SEE YOU ALL THERE!!!!!
If anyone has a spare Holley 8.5hg Power valve they could bring it would be really appreciated, thanks.