Mopar Muscle Association UK

Posted: **Wed Mar 27, 13 9:38 pm**

http://www.dragtimes.com/blog/mclaren-m ... the-veyron

Posted: **Wed Mar 27, 13 9:41 pm**

Yep made just down the road from me, see em all the time on the A3 being thrashed, Er... (tested)...and some are stored opposite my mates garage on a Military base

They are doing a spyder minus the roof so must be lighter still..gonna be quick
It demolished that Camaro and Merc

Posted: **Wed Mar 27, 13 10:00 pm**

steve, spyder versions of most cars are a fair bit heavier than the std model not lighter

Posted: **Wed Mar 27, 13 10:23 pm**

I drive past Longcross test track everyday, going to & from work, only about 5 mins from my house.

On average i see 3-4 McLarens a week, blatting to & from the test track. There normally covered in blue tape to protect the body work, but there throttle seems to work fine

Posted: **Wed Mar 27, 13 11:02 pm**

One of my work colleagues left last year to work at McLaren instead. Have not spoken to him since but one of the other guys who lives near him said there was a McLaren on his driveway the other day

Posted: **Thu Mar 28, 13 1:12 am**

andyrob wrote:steve, spyder versions of most cars are a fair bit heavier than the std model not lighter

Yes, normally the case with steel cars but I think I heard recently that's not necessarily so with carbon fibre type cars, cos the strength is already there without having to add weight

Posted: **Thu Mar 28, 13 8:45 am**

Impressive

Not bad for an engine that is essentially a close copy of a Nissan unit

Two prototypes of these cars were brought in to Bridges scrapyard at Pease Pottage a few weeks back for total destruction of all components. Well, nearly all

Posted: **Thu Mar 28, 13 11:12 am**

andyrob wrote:steve, spyder versions of most cars are a fair bit heavier than the std model not lighter

Bugger

latil wrote:Impressive Not bad for an engine that is essentially a close copy of a Nissan unit
Two prototypes of these cars were brought in to Bridges scrapyard at Pease Pottage a few weeks back for total destruction of all components. Well, nearly all

That bit of luck happened to my cousin Keith...who ran the Corvette club
snooping around a scrap yard up near Hethel Norfolk...came across 2 ZR1 prototypes that had not been completely scrapped
one still with the Engine and Lotus prototype heads fitted
so he bought them and went about rebuilding THE prototype ZR1 Corvette, using another 85 body. as the 85 prototype was beyond repair.

Its legendary as GM wanted nothing to do with it...but its been all over the world appearing at shows etc.
I have a pair of bare proto Lotus Corvette 32 valve ali heads somewhere in the garage Keith let me have.

Thats one for Dave to check out

Posted: **Thu Mar 28, 13 12:41 pm**

Sorry Steve but I have no interest in the C3 and C4 Corvettes. They were crap.

Posted: **Thu Mar 28, 13 1:07 pm**

ZR1 bit of a different beast though Dave ?

Posted: **Sun Mar 31, 13 10:56 pm**

They are doing a spyder minus the roof so must be lighter still..gonna be quick......

Steve, 12c Spiders are 40kg heavier than a coupe
Stock 1/4 mile times are 10.6@ 136 for the coupe and 10.8@134 for the spider.

Posted: **Sun Mar 31, 13 10:58 pm**

mike jones wrote:They are doing a spyder minus the roof so must be lighter still..gonna be quick......

Steve, 12c Spiders are 40kg heavier than a coupe
Stock 1/4 mile times are 10.6@ 136 for the coupe and 10.8@134 for the spider.

Straight from the horses mouth

Impressive 1/4 times for a Super car

Posted: **Sun Mar 31, 13 11:48 pm**

its a tough job, but i manage,

Mopar Muscle Association UK

McLaren MP4-12C runs 10.55 @ 134.56 MPH.

McLaren MP4-12C runs 10.55 @ 134.56 MPH.