Page 1 of 1
master cylinders interchangebiltiy
Posted: Wed Jan 29, 14 4:47 pm
by John
I want a knew master cylinder for the Coronet and wondered if the years were compatible. It's a 67 with power drums with the lines feeding to o the fender side. I think Imay have a later one anyhow as the cap is held on with a wire clip without the aid of a bolt in the middle but wanted to check before ordering.
Posted: Wed Jan 29, 14 9:12 pm
by MattH
Description sounds the same as my 73 Challenger, a large and a small reservoir which are totally seperate, one pipe out of each towards the fender.
Posted: Wed Jan 29, 14 10:18 pm
by Mossy68
Hi John.
My 68 power brake is a midland Ross type ( bolt down cover )
I would think yours should be the same ( originally )
Where you buying from ?
Posted: Wed Jan 29, 14 10:41 pm
by John
Thanks chaps,
Not sure yet Gary.
Posted: Wed Jan 29, 14 10:48 pm
by Mossy68
Was quoted £175+vat for M/C and booster from Customville
Don't know how others price up ?
Posted: Thu Jan 30, 14 9:07 am
by Guy
http://www.summitracing.com/int/search/ ... and/dorman
The top one which i believe would be correct for yours John only $88 to your door inc vat duty etc
Posted: Thu Jan 30, 14 11:49 am
by John
Thanks Guy,
I did look at these but wasnt sure if it was the correct one.
Maybe I should just go for it
Posted: Thu Jan 30, 14 12:33 pm
by John
OK - Ordered from Summit
Posted: Thu Jan 30, 14 1:42 pm
by steveo
yeah that's the one I have , now
the other type with the lid held on with wire spring clamp thingies , are / were , a1 cardon / raybestose repop version