Mopar Muscle Association UK

Hello all,

Fairly new here and I am looking for advice. I have a 66 chrysler 300 with a stock 383 with holly carb. I am looking to get it tuned up but have never done this before.

Can anyone recommend somewhere that I could get this done or know any groups that meet that could give advice?

I am near Reading, Berkshire.

Thanks

Bill

Hi De Ho!
Plenty of advice here. Surely must be a Reading local to help ya!
Any mech knowledge? Could be sorted via here.
But hands on tuition is the go!
Good Luck!

Have a go yourself matey, its all part of the fun with our old cars. Plenty of guidance here if you get stuck.

I would bang some new, correctly gapped plugs in, new fuel and air filter, oil change if she needs it then do some reading on timing. Sort that, then research your carb and how to set it up....make notes on what settings she runs on before tuning and you can always go back to them. You will get to know the car better and have fun doing it.

Daves threads on timing are great....check out Si's links to them about 4 posts down

http://www.moparuk.com/forums/viewtopic ... ght=timing

Cheers Steve

If you don't mind travelling I can always set the car up for you.

Thanks guys for all the replies. Iv got a lot of learning to do but looking forward to getting stuck in!