Page 1 of 1
transmission oil cooler
Posted: Thu Jun 09, 16 10:53 pm
by Ed
What sort of size oil cooler would be suitable for a 727 tranny?
Currently it goes into the radiator but I'm thinking of changing that.
Ta.
Posted: Fri Jun 10, 16 1:48 pm
by Dave81
This is what ive used on mine. Its a 904 not a 727 but cant see it needing anything different:
Its a Mocal 235mm 13 Row Unit.
Not had any issues (though I never did before).
Got it from here:
http://www.ebay.co.uk/itm/Mocal-Race-Ra ... 53fc4e3acb
Posted: Fri Jun 10, 16 4:02 pm
by db
Good plan- my Truk had a Rover V8 with the same trans oil in the rad setup. The water rotted through to the trans fluid, killing the trans brake bands/ clutches, etc!
Thanks to Dunc for the repair and diagnosis I separated them and never looked back
Posted: Fri Jun 10, 16 7:05 pm
by MilesnMiles
I had the same as Dave on a 'built' transmission and it was/is fine.
Just couldn't afford all those lovely aeroquip hoses
Actually, couldn't squeeze them in the available space due to proximity of shifter linkage and TTI headers.
Posted: Sat Jun 11, 16 5:42 am
by Dutchrunner
Have the larger one from B&M . With fan on it and temp sensor for fan on/off.
Smaller one was not enough when using the loud pedal heavily.
Think it's also depending on HP level
