Page 1 of 2

new member 69 charger

Posted: Thu Aug 18, 16 9:02 pm
by billybob73
just bought my first yank car been after one for years , you guys probably seen it on ebay about a month ago, got it home with oil leak ended up needing engine there was a crack from the oil filter housing to the sump , anyway im up and running now , enjoying driving it , will be upgrading it as i can afford it , hello to you all :)

https://scontent-lhr3-1.xx.fbcdn.net/v/ ... e=58553210

Posted: Thu Aug 18, 16 9:05 pm
by Pete
Welcome to the club. Great looking car; I assume a small block given your problems?? I could be wrong?

Please post up more pictures, thanks.

Where are you based?

Posted: Thu Aug 18, 16 9:17 pm
by billybob73
im in dumfries in scotland , got the charger from bournemouth , yeh its a small block , its amtching number so going to keep it but not sort it, managed to get another 318cu on an british american car parts site on facebook , fitted it this week , been out in it most days this week has been a blast

https://scontent-lhr3-1.xx.fbcdn.net/v/ ... e=585AA181

https://scontent-lhr3-1.xx.fbcdn.net/v/ ... e=58522481

https://scontent-lhr3-1.xx.fbcdn.net/v/ ... e=5859802B

Posted: Thu Aug 18, 16 9:26 pm
by Pete
You have a great set up there!

Posted: Thu Aug 18, 16 9:36 pm
by billybob73
yeh built shed last year to my specs makes life easy when youve got a good man cave , i got a 727 trans with the engine its no good to me im a floor shift 3 speed is it ok being a newbie advertising it for sale?

Posted: Thu Aug 18, 16 9:53 pm
by andyrob
Welcome, enjoy your charger and
Pete wrote:You have a great set up there!

:iagree:

Posted: Thu Aug 18, 16 9:58 pm
by Pete
Yes, advertise away, but floor shift and column shift transmissions are the same with different linkages.

Posted: Thu Aug 18, 16 10:21 pm
by ScottyDave
Hello nice car and man cave

Posted: Thu Aug 18, 16 10:41 pm
by Charger
hello there :hello2:, nice car 8-), great shed :thumbright:

Posted: Fri Aug 19, 16 2:50 am
by Rebel
Hi and welcome,
Agree with Pete and Andy, amazing garage and a great car aswell

Posted: Fri Aug 19, 16 3:56 pm
by Dom66
Welcome on board :thumbright:

Nice General and yes, a bit jealous of that workshop.... 8-)

Posted: Fri Aug 19, 16 5:45 pm
by Derek
Welcome to the mad house.

Posted: Fri Aug 19, 16 8:15 pm
by billybob73
a right never realised it was just the linkages that was the only difference between floor and column shift, im not used to american motors but im learning quickly , thanks for comments , im quite proud of my shed took me and a builder 6 weeks to build, was hard going ,the steel beam that holds the roof up is half of a montracon truck trailer , took a bit of work cutting it up and making it fit was way cheaper than an 11 metre steel beam from the local steel stockholder , the other half wasnt to chuffed i turned the back garden into an industrial estate lol

Posted: Wed Aug 24, 16 2:33 am
by 68 beeper
Welcome to the club
I live near bournemouth did you buy it off a guy called jason ?

car

Posted: Wed Aug 24, 16 8:03 pm
by karlee1433
welcome