Page 1 of 1
Early Mopar Thermostat Housing/Outlet
Posted: Tue Jan 10, 17 11:22 am
by Motorama
I need the hose outlet from the intake to the top hose on a 57 Plymouth 301. Im led to believe theyre mostly the same from the 50s to the 70s> Any one know if thats true and where i might get the correct one
Posted: Tue Jan 10, 17 12:07 pm
by Blue
Hard to make out in your photo, is it just the rad hose coming off the thermostat housing or is that heater hose connected to it as well?
Posted: Tue Jan 10, 17 1:24 pm
by Motorama
Blue wrote:Hard to make out in your photo, is it just the rad hose coming off the thermostat housing or is that heater hose connected to it as well?
was the only pic i had and the cars stored away from home at the mo, the heater hose comes off the inlet manifold just below the thermostat housing. The housing fitted is pretty rusted at the end and the hose is only just held on the last bit of good metal
Posted: Tue Jan 10, 17 5:34 pm
by Blue
In that case a later one should work, I think I've got one I'll have a look when I get 5...
Posted: Tue Jan 10, 17 5:37 pm
by Motorama
Blue wrote:In that case a later one should work, I think I've got one I'll have a look when I get 5...
Cheers, i'll get a better pic of it over the next few days
