Mopar Muscle Association UK

New water pump, new (cheap looking) gasket failed. I've ordered a spare pair (Felpro) but cant get them until next week.

If anyone has one that they would post down for this weekend id be grateful. Obviously I'll post a replacement back next week.

Never had so much aggro simply replacing a water pump.

Miles, just use some of that silicone gasket maker in a tube. That's what I used. Only needs a smear. Mind you, it's a much smaller mating surface on abig block.

I did Adam, dam thing still leaked! Fist time I fitted it I think the gasket might have slipped as I moved the pump past the power steering bracket.
The second time I just used gasket blue and torqued it down. Still leaked..

I'll have a look tomorrow, Miles. I did have a couple and I also made the one that's been on the Demon for a year or so

I did a combination on all mine, SB and BB. Light smear on each face and gasket between. Never leaked

Thanks James, looks like I've been unlucky or not cleaned the faces sufficiently. At least I've got nice new bolts that fit properly now!

Mr Kellogg usually helps me out with this sort of thing. Scissors,scalpel,hole punch and some Hylomar.

Which one Miles?

I use the shape on the right. I've got two homemade ones but I darent send one of those hahaha be a bit embarrassing if it leaked Even though when I replaced the inlet manifold I made my own and again after last years engine rebuild, both where/are fine

I can post today

Hi James, its the one on the right mate. thanks very much! I'll send a replacement back to you next week.
Just Pm'd you my addresss

It's on its way

I have sent a text but it was stuck in "cued for sending" so ignore that if it comes through

Thanks James, back on the road again. CheersðŸ‘￾

Top job mate, happy to help. Glad you got it sorted