Page 1 of 2
Back again, been a while
Posted: Wed Aug 08, 18 10:21 pm
by mopar_mark
Just saying Hi again,
Not been in here for a couple of years, rejoined last weekend.Good to see some old names still around
Cheers,
Mark...
Re: Back again, been a while
Posted: Wed Aug 08, 18 10:25 pm
by Derek
Welcome back mate.
Re: Back again, been a while
Posted: Wed Aug 08, 18 10:34 pm
by andyrob
Re: Back again, been a while
Posted: Thu Aug 09, 18 12:38 am
by Super Sloth
how do!
Re: Back again, been a while
Posted: Thu Aug 09, 18 1:09 am
by RobTwin
Hi Mark, good to see you back on here. Looking forward to some updates on the cuda!
Re: Back again, been a while
Posted: Thu Aug 09, 18 12:22 pm
by MrNorm
Welcome back, and how's the cuda??!!
Re: Back again, been a while
Posted: Thu Aug 09, 18 5:41 pm
by sublimemike
Wondered where you got to. Good 2cu back.
Re: Back again, been a while
Posted: Thu Aug 09, 18 10:21 pm
by Mossy68
Welcome back Mark
Re: Back again, been a while
Posted: Sun Aug 12, 18 12:36 pm
by R.RUNNER
Re: Back again, been a while
Posted: Sun Aug 12, 18 3:47 pm
by Captain Chaos
Welcome back
Re: Back again, been a while
Posted: Sun Aug 12, 18 9:41 pm
by mopar_mark
Well not much has changed, that being the Cuda is in bits again. Currently having a new chassis, as the old chassis was a mix of CDS & Chrome Moly, as such was limited to 7.50.
The new chassis will be Chrome Moly & is tagged to 6.2, basically the same as unlimited, but restricted, as weight may be above 2800lbs. If I can get the weight down to 2,800lb or less , chassis can be tagged 6.1.
Have also upgraded to a new axle & switching from a Glide to a TH400, but still a 2 Speed. Due to physical size, TH400 offers better gear selection than available for the Glide. Engine cubes reduced from 572 to 521, Turbos also been upgraded
Car won’t be out running till next year ....but hoping to beat our 8.01/172 in full street trim
Re: Back again, been a while
Posted: Mon Aug 13, 18 9:35 am
by RobTwin
mopar_mark wrote: Sun Aug 12, 18 9:41 pm
Well not much has changed, that being the Cuda is in bits again. Currently having a new chassis, as the old chassis was a mix of CDS & Chrome Moly, as such was limited to 7.50.
The new chassis will be Chrome Moly & is tagged to 6.2, basically the same as unlimited, but restricted, as weight may be above 2800lbs. If I can get the weight down to 2,800lb or less , chassis can be tagged 6.1.
Have also upgraded to a new axle & switching from a Glide to a TH400, but still a 2 Speed. Due to physical size, TH400 offers better gear selection than available for the Glide. Engine cubes reduced from 572 to 521, Turbos also been upgraded
Car won’t be out running till next year ....but hoping to beat our 8.01/172 in full street trim
Awesome
Re: Back again, been a while
Posted: Mon Aug 13, 18 5:44 pm
by R.RUNNER
Re: Back again, been a while
Posted: Mon Aug 13, 18 10:20 pm
by mopar_mark
R.RUNNER wrote: Mon Aug 13, 18 5:44 pm
It would nice to see the "CUDA" back in stock trim
I don’t ever see that happening
Re: Back again, been a while
Posted: Mon Aug 13, 18 10:35 pm
by mopar_mark
