Page 1 of 1
BW35 tailshaft housing
Posted: Tue Dec 08, 20 5:31 pm
by AndyB
A mate is chasing a decent tailshaft housing for a Borg Warner 35 trans. In a VJ Charger with a 265. Probably like rocking horse Bananarama! in the UK but, you don't know if you don't ask!
Cheers, Andy
Re: BW35 tailshaft housing
Posted: Tue Dec 08, 20 5:33 pm
by AndyB
Probably should have written 'sh#t' to avoid the bananarama!
Re: BW35 tailshaft housing
Posted: Thu Dec 10, 20 10:22 am
by Dave999
ah for tony
i owned a bw35 once but sold it.
think he is limited to 6 cylinder VG onward cars
other option is to get a slant 904, cut a section from the bell housing from it and the BW35 and weld in the BW35 starter part in in the right place
run the 904 converter.
potentially cheaper to get one from Oz
https://www.ebay.com.au/itm/Valiant-CL- ... SwTnpfvTv2
otherwise asking these fellas has helped me before
https://www.austtrans.com/contact-us.aspx
expect $100-200 for a blasted cleaned checked housing
Dave
Re: BW35 tailshaft housing
Posted: Tue Dec 22, 20 7:27 pm
by AndyB
Thanks very much Dave
I'll forward this to Tony!
Cheers, Andy