Page 1 of 1
externally balanced flexplate
Posted: Thu Jan 05, 06 3:32 pm
by Anonymous
Howdi,
Anyone heard of or know where I can get a flexplate for an externally balanced 360 that will allow weights to be added/welded?
Beers,
Steve
Posted: Thu Jan 05, 06 4:02 pm
by Dave-R
Summit Racing?
Posted: Wed Jan 11, 06 2:27 pm
by Anonymous
Thanks Dave! Turns out B&M do one that will allow the use of a 318/340 converter (internally balanced). It'll save me some money in the long run...
Steve
Posted: Wed Jan 11, 06 3:29 pm
by Dave-R
I think Real Steel sell them over here but are probably more expensive.
Posted: Wed Jan 11, 06 5:16 pm
by MilesnMiles
I have one to allow a 904 to be mated to a 360 and you can use any convertor
?45 plus p&P (B&M type)
Posted: Wed Jan 11, 06 5:19 pm
by MilesnMiles
PS Its brand new and unused. I have a 727 box so mine is surplus. Use the plate and there is no need to add/subtract weights to the 'vertor
Note The (B&M)plate only fits 10/9 inch convertors. TCI do one to fit 11" converors which is what i have.
Posted: Fri Jan 13, 06 1:36 pm
by Anonymous
Kinda panicked there a bit as I'm using a 727 also. Called Summit, B&M must've just released one to use with the stock conv (it's also drilled for a 10"), sigh of relief...
Posted: Fri Jan 13, 06 6:33 pm
by MilesnMiles
Yes steve, thats why i ended up going wuth TCI as B and M didnt have what I needed. All sortednow, but I missed the Nats as a result
