Caltracs B/E body
Posted: Tue May 20, 25 6:28 pm
These were on the Road Runner, I don't race any more so decided to take them off.
Part number is 4220.
I sanded them down to bare metal and gave them three coats of engine enamel.
Rose joints are as good as new with no wear. The aluminium spring eye bushes are 2 inch diameter so would suit B body springs. I believe E body springs need 1 1/2" bushes but I can turn them down if that's what you need.
£250 collected from Birmingham. I'm 5 minutes drive from the M6 Junction 4.
Part number is 4220.
I sanded them down to bare metal and gave them three coats of engine enamel.
Rose joints are as good as new with no wear. The aluminium spring eye bushes are 2 inch diameter so would suit B body springs. I believe E body springs need 1 1/2" bushes but I can turn them down if that's what you need.
£250 collected from Birmingham. I'm 5 minutes drive from the M6 Junction 4.