Piece of ground flat/gauge plate 1/4 inch thick 12 x 10
Posted: Mon Sep 29, 25 11:46 am
Looking for some ground flat/gauge plate for a bellhousing adapter
1/4 inch or 6mm thick
10x12 inch
before i buy a standard length wondered if anyone had a sizable offcut
preferably rust free
i.e it needs to erm....flat..orange and clean up-able is fine
standard mild steel rolled flat plate is too wonky from the get go..
David
1/4 inch or 6mm thick
10x12 inch
before i buy a standard length wondered if anyone had a sizable offcut
preferably rust free
i.e it needs to erm....flat..orange and clean up-able is fine
standard mild steel rolled flat plate is too wonky from the get go..
David