Rebuilding your Torqueflite

DHenry · Post by **DHenry** » Thu Nov 11, 04 4:43 pm

Hi Ivor,
If you want to see a really in depth rebuild video have a look at `Technical Video` at 16325 E. Lincoln Drive, Fall Creek, WI. it lasts approx 90 mins and is quite good. Believe me the 727 is not difficult if you get the right parts.Hope this helps

Regards
Dave H

Ivor · Post by **Ivor** » Thu Nov 11, 04 5:38 pm

Thanks Dave, if the next step doesn't work, I'm watching the telly!

Rich · Post by **Rich** » Sat Nov 13, 04 2:33 am

Never mind the telly,just get on the M6

and follow the signs for Crewe!!

Ivor · Post by **Ivor** » Sun Nov 14, 04 9:53 am

Sorted mate! Even the clearances are spot on, engine and box is back together complete with new ATI converter and flex plate..I'll post the saga with a pic later one.

Phew, no wonder so many people give the job to the pros!

Ivor · Post by **Ivor** » Sun Nov 14, 04 7:05 pm

Here we go. All the clearances cock on, engine and gearbox together...but will it actually work?

Check the starter thread regarding clearance issues with headers!