B Body wheels

Moderator: Moderators

Post Reply
Steve Chapman
Posts: 1862
Joined: Wed Jan 10, 07 4:03 pm
Location: North Yorkshire

B Body wheels

Post by Steve Chapman »

Can anyone advise me on the the best size of wheel and tyres to fit front and back on a 66 Coronet. Street/Strip use . Cheers
User avatar
Cannonball
Posts: 17242
Joined: Sun Apr 18, 04 11:26 pm
Location: crewe, cheshire
Contact:

Post by Cannonball »

thats difficult/
if your rear end is stock you cannot get much off a tyre under the back arches, for street wheels go 8x15 with a 235 60 15 tyre they will also take that size on the front for slicks again 8x 15 wheel with a 28 tall 10 wide 15 diameter slick IF you have a 3.90 rear upwards, 3.55 or less go for a 26 tall slick,
if you want the full racer look go with a 5x15 front wheel and say a 185 70 15 front tyre
Steve Chapman
Posts: 1862
Joined: Wed Jan 10, 07 4:03 pm
Location: North Yorkshire

Post by Steve Chapman »

Cheers lads, i,ll get me tape measure out
Anonymous

Post by Anonymous »

not a lot of room under them there arches, :( especially if you don`t tub it),back spacing is important I think my backspacing is the same as yorkies I have 275x60x15 m/t`s no more rubbing on arches 8-)
Steve Chapman
Posts: 1862
Joined: Wed Jan 10, 07 4:03 pm
Location: North Yorkshire

Post by Steve Chapman »

Thanks "66" i,ve seen your car at York and at the Leeds criuse and it certainly looks and sits spot on, youve all given us something to go on thanks for the advise :)
User avatar
Ian Z
Posts: 1462
Joined: Sun Jan 15, 06 9:33 pm
Location: Preston, oop north

Post by Ian Z »

looking good Simon! Nearly there?
You ready for York Mr Hall, and Si?
Involuntarius peristalsis rectum

"A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo
<a href="http://www.mybannermaker.com/" target="_blank"><img src="http://img153.imageshack.us/img153/1862 ... cebsh4.jpg" alt='Create your own banner at mybannermaker.com!'></a><br>
Anonymous

Post by Anonymous »

still need to fit some spacers between rockers,& fit bigger fuel line :D going to try bigger burnouts on the m/t`s ,been told they work better 8-) you ready ian? you gonna get that car to york this year yorkie?
Anonymous

Post by Anonymous »

is your car coming on ok chip? lets get a `66 meeting aranged for york :D :D :D :D :D
Anonymous

Post by Anonymous »

been told to get some ss springs too............we`ll see ( got to finish kitchen off!!!!) :lol:
Anonymous

Post by Anonymous »

that`d be cool, 8-) can`t wait for the season to start \:D/
Steve Chapman
Posts: 1862
Joined: Wed Jan 10, 07 4:03 pm
Location: North Yorkshire

Post by Steve Chapman »

Yeah i,ll be at York ,Shakey Pod this year hopefully ,,plus trips to Leeds and Preston , funds permitting. I intend to put plenty of miles down, thats what its for
Post Reply