Lowering......who to go with

Anonymous · Post by **Anonymous** » Mon Jan 29, 07 12:15 am

I'd like to lower my car I reckon......Not right away but...

Who's best to deal with/sells decent/good enough springs to do this??

The rear end hangs pretty low anyway due to the knackered springs. It's got the pukka beefier leafspring on one side though but sadly it has also had to have those aftermarket coil springs added so I'd like to bin the lot and sick on some nice new'uns.

Anonymous · Post by **Anonymous** » Mon Jan 29, 07 1:00 am

Hemi springs

Anonymous · Post by **Anonymous** » Mon Jan 29, 07 8:55 am

Mono leafs in 1" lower than stock

SS springs are heavy, are now made from old Mexican Knicker elastic,

Monos are cheaper (by the time they get here) lighter and work better

Anonymous · Post by **Anonymous** » Mon Jan 29, 07 9:09 am

Mono leafs sound cool Neil. What about the front torsion bars?

Ivor · Post by **Ivor** » Mon Jan 29, 07 9:21 am

steve of doom wrote:What about the front torsion bars?

Steve...get a grip mate!

First go and buy yourself a socket set....

Anonymous · Post by **Anonymous** » Tue Jan 30, 07 5:25 pm

Whats with you Ivor?

Blue · Post by **Blue** » Tue Jan 30, 07 5:43 pm

Front end ride height is adjustable with a socket and a ratchet via a bolt in the lower control arm, don't adjust it with the weight of the vehicle on it, it can shear off and crush you, don't ask me how I know.....

Anonymous · Post by **Anonymous** » Tue Jan 30, 07 10:09 pm

Oh my god!!!

thats handy then.

See Ivor, you've always gotta cater for complete deacons like me.

I'm goona pimp my ride reet good like'

Anonymous · Post by **Anonymous** » Tue Jan 30, 07 10:13 pm

steve of doom wrote:Oh my god!!! thats handy then.

See Ivor, you've always gotta cater for complete deacons like me.

I'm goona pimp my ride reet good like'

Think Ivor was tryin to give you a hint Steve

Don't think he was tryin to be funny.If that were the case,he would of been on to me like a ton of bricks

Anonymous · Post by **Anonymous** » Wed Jan 31, 07 9:42 pm